Steady State IV Test Equipment | Sciencetech Inc.
Standard USD Pricelist

  • x

    Solar Cell IV Testing Equipment for Steady State Solar Simulators

    Solar cell current-voltage (IV) testing equipment allows the user to quantify a solar cell’s current and voltage response under broadband illumination. This would typically be compared to a reference cell with known response.  Check out some of our Modular IV test equipment for continuous solar simulators.   

    2 4
    Filter View Filter
    Sort by
    X

    Product Category

    View Filter
    • Filter By
      Maximum Voltage, Current
      (Clear all)
    • Filter By
      SourceMeter Interface
      (Clear all)
    • Filter By
      Brands
      (Clear all)
      • Price Filter
      $ - $
    x
    Clear all x

    Filter Option

    The SSIVT is a complete electrical current-voltage measurement system used to characterize photovoltaic cell performance. This current-voltage tester works by sampling current at different voltages of the photovoltaic cell with a variable impedance load.

    This IV measurement system has a separate terminal interface for voltage and current measurements. Each IV curve dataset is saved as a separate ASCII text file.

    This I-V Testing Measurement System has a 4 wire Kelvin configuration to remove the resistance effects of the leads and bias the cell at specific voltages.

    The I-V Measurement System SSIVT-F includes:

    - Source Measure Unit (SMU) - See table for specifications depending on chosen model.
    - Load Booster module to increase current measurement range of the SMU (model dependent)
    - Sciencetech's SciPV-IV Software for Windows-based control.
    - Windows 7/10 32/64 bit
    - RS232 to USB dongle

    Compatible with Flash (Pulsed) Solar Simulators only.

    See brochure for more details.
    $ 12,620.00
    In stock
    The SSIVT is a complete electrical current-voltage measurement system used to characterize photovoltaic cell performance. This current-voltage tester works by sampling current at different voltages of the photovoltaic cell with a variable impedance load.

    This IV measurement system has a separate terminal interface for voltage and current measurements. Each IV curve dataset is saved as a separate ASCII text file.

    This I-V Testing Measurement System has a 4 wire Kelvin configuration to remove the resistance effects of the leads and bias the cell at specific voltages.

    The I-V Measurement System SSIVT-F includes:

    - Source Measure Unit (SMU) - See table for specifications depending on chosen model.
    - Load Booster module to increase current measurement range of the SMU (model dependent)
    - Sciencetech's SciPV-IV Software for Windows-based control.
    - Windows 7/10 32/64 bit
    - RS232 to USB dongle

    Compatible with Flash (Pulsed) Solar Simulators only.

    See brochure for more details.
    $ 12,620.00 12620.0 USD
    Price Valid only in North America

    The SSIVT is a complete electrical current-voltage measurement system used to characterize photovoltaic cell performance. This current-voltage tester works by sampling current at different voltages of the photovoltaic cell with a variable impedance load.

    This IV measurement system has a separate terminal interface for voltage and current measurements. Each IV curve dataset is saved as a separate text file.
    This I-V Testing Measurement System has a 4 wire Kelvin configuration to remove the resistance effects of the leads and bias the cell at specific voltages.

    The I-V Measurement System SSIVT-C includes:
    - Source Measure Unit (SMU) - See table for specifications depending on chosen model.
    - Sciencetech's SciPV-IV Software for Windows-based control - Windows 10/11
    - RS232 to USB dongle
    - Test cell

    Compatible with Steady State (Continuous) Solar Simulators only.
    See brochure for more details.
    $ 10,620.00
    In stock
    The SSIVT is a complete electrical current-voltage measurement system used to characterize photovoltaic cell performance. This current-voltage tester works by sampling current at different voltages of the photovoltaic cell with a variable impedance load.

    This IV measurement system has a separate terminal interface for voltage and current measurements. Each IV curve dataset is saved as a separate text file.
    This I-V Testing Measurement System has a 4 wire Kelvin configuration to remove the resistance effects of the leads and bias the cell at specific voltages.

    The I-V Measurement System SSIVT-C includes:
    - Source Measure Unit (SMU) - See table for specifications depending on chosen model.
    - Sciencetech's SciPV-IV Software for Windows-based control - Windows 10/11
    - RS232 to USB dongle
    - Test cell

    Compatible with Steady State (Continuous) Solar Simulators only.
    See brochure for more details.
    $ 10,620.00 10620.0 USD
    Price Valid only in North America

    This device is designed to be coupled to one of Sciencetech's IV Test systems. The Load Booster is inserted between the Keithley and the device under test with the Keithley current range set to 0.1A and used in remote (4 wire) sensing mode. The Load Booster effectively expands the IV testing current range.
    Load Boosters may only be used in pulsed mode operation. They cannot be used for continuous illumination and measurement.
    Voltage Range: 200V
    Current Range: 80A

    $ 8,500.00
    This device is designed to be coupled to one of Sciencetech's IV Test systems. The Load Booster is inserted between the Keithley and the device under test with the Keithley current range set to 0.1A and used in remote (4 wire) sensing mode. The Load Booster effectively expands the IV testing current range.
    Load Boosters may only be used in pulsed mode operation. They cannot be used for continuous illumination and measurement.
    Voltage Range: 200V
    Current Range: 80A

    $ 8,500.00 8500.0 USD
    Price Valid only in North America

    This device is designed to be coupled to one of Sciencetech's IV Test systems. The Load Booster is inserted between the Keithley and the device under test with the Keithley current range set to 0.1A and used in remote (4 wire) sensing mode. The Load Booster effectively expands the IV testing current range.
    Load Boosters may only be used in pulsed mode operation. They cannot be used for continuous illumination and measurement.
    Voltage Range: 200V
    Current Range: 60A
    $ 8,000.00
    This device is designed to be coupled to one of Sciencetech's IV Test systems. The Load Booster is inserted between the Keithley and the device under test with the Keithley current range set to 0.1A and used in remote (4 wire) sensing mode. The Load Booster effectively expands the IV testing current range.
    Load Boosters may only be used in pulsed mode operation. They cannot be used for continuous illumination and measurement.
    Voltage Range: 200V
    Current Range: 60A
    $ 8,000.00 8000.0 USD
    Price Valid only in North America

    This device is designed to be coupled to one of Sciencetech's IV Test systems. The Load Booster is inserted between the Keithley and the device under test with the Keithley current range set to 0.1A and used in remote (4 wire) sensing mode. The Load Booster effectively expands the IV testing current range.
    Load Boosters may only be used in pulsed mode operation. They cannot be used for continuous illumination and measurement.
    Voltage Range: 200V
    Current Range: 40A
    $ 7,000.00
    This device is designed to be coupled to one of Sciencetech's IV Test systems. The Load Booster is inserted between the Keithley and the device under test with the Keithley current range set to 0.1A and used in remote (4 wire) sensing mode. The Load Booster effectively expands the IV testing current range.
    Load Boosters may only be used in pulsed mode operation. They cannot be used for continuous illumination and measurement.
    Voltage Range: 200V
    Current Range: 40A
    $ 7,000.00 7000.0 USD
    Price Valid only in North America

    This device is designed to be coupled to one of Sciencetech's IV Test systems. The Load Booster is inserted between the Keithley and the device under test with the Keithley current range set to 0.1A and used in remote (4 wire) sensing mode. The Load Booster effectively expands the IV testing current range.
    Load Boosters may only be used in pulsed mode operation. They cannot be used for continuous illumination and measurement.
    Voltage Range: 200V
    Current Range: 20A

    $ 6,000.00
    This device is designed to be coupled to one of Sciencetech's IV Test systems. The Load Booster is inserted between the Keithley and the device under test with the Keithley current range set to 0.1A and used in remote (4 wire) sensing mode. The Load Booster effectively expands the IV testing current range.
    Load Boosters may only be used in pulsed mode operation. They cannot be used for continuous illumination and measurement.
    Voltage Range: 200V
    Current Range: 20A

    $ 6,000.00 6000.0 USD
    Price Valid only in North America

    This device is designed to be coupled to one of Sciencetech's IV Test systems. The Load Booster is inserted between the Keithley and the device under test with the Keithley current range set to 0.1A and used in remote (4 wire) sensing mode. The Load Booster effectively expands the IV testing current range.
    Load Boosters may only be used in pulsed mode operation. They cannot be used for continuous illumination and measurement.
    Voltage Range: 200V
    Current Range: 10A
    $ 5,000.00
    This device is designed to be coupled to one of Sciencetech's IV Test systems. The Load Booster is inserted between the Keithley and the device under test with the Keithley current range set to 0.1A and used in remote (4 wire) sensing mode. The Load Booster effectively expands the IV testing current range.
    Load Boosters may only be used in pulsed mode operation. They cannot be used for continuous illumination and measurement.
    Voltage Range: 200V
    Current Range: 10A
    $ 5,000.00 5000.0 USD
    Price Valid only in North America
    Copyright © Sciencetech