Data Acquisition Equipment

The LIA / PS-1 is a combination lock-in amplifier and low noise power supply which powers Sciencetech's detectors to the receiver preamplifiers. In addition, the PS-1 works well as a general purpose, dual - polarity laboratory power supply.

$ 1,500.00

This is a Stanford SR-810 Lock-in Amplifier. Used with several of Sciencetech's I,V Testing systems.
The SR810 provides high performance at a reasonable cost. The SR-810 uses digital signal processing (DSP) to replace the demodulators, output filters, and amplifiers found on conventional lock-ins.

$ 6,000.00

This Lock-in Amplifier is specifically designed to work with IR Detectors and choppers, with a dual-phase lock-in. Includes all necessary components including software.
The device has 100 dB of true dynamic reserve without the need for input pre-filtering, time constants from 10 ms to 30 ks with 6, 12, 18 and 24 dB/octave filter rolloff, and includes a precision synthesized reference source with 25 ppm frequency accuracy and <-80 dBc distortion.
There are two data displays, allowing the simultaneous display of X and Y, or R and θ. RS-232 and GPIB interfaces capable of reading and setting all instrument functions.

For a full list of technical specifications and to determine if this Lock-in Amplifier is appropriate for your system or detector, please speak with your authorized Sciencetech technical sales staff member.

$ 7,583.00

This 12-bit data aquisition module features 3 analog inputs via BNC connectors. The data aquisition board is 12Bit and can measure a single channel up to 50Ks/S. An additional BNC connector for a trigger input can be used to time measurements and/or send signals to external hardware such as a high speed shutter.

This module includes 1 BNC cable and 1 USB cable so that it is ready to interface with a single channel detector such as a PMT or UVSi photodiode detector (sold seperatley). For spectroscopy systems the Sci-Spec Windows application software to interface with a Windows Based PC is required and is sold separately.

This module is wired for single ended input for +/-10V input range. This module can be wired for differential inputs upon request.
For most single channel data aquisition options where differential inputs are not required the SCI-DAS-12USB-LS option is a suitable and economical option.

multi-channel dataaquisition is possible using SciSpec software, if this option is required please speak to a Sciencetech technical sales representative.

$ 706.00

This 16bit data aquisition module features 3 analog inputs via BNC connectors. The data aquisition board is 16Bit and can measure a single channel up to 50Ks/S. An additional BNC connector for a multi-purpose digital input/output can be used to time measurements and/or send signals to external hardware such as a high speed shutter.

This module includes 1 BNC cable and 1 USB cable so that it is ready to interface with a single channel detector such as a PMT or UVSi photodiode detector (sold seperatley). For spectroscopy systems the Sci-Spec Windows application software to interface with a Windows Based PC is required and is sold separately.

multi-channel dataaquisition is possible using SciSpec software, if this option is required please speak to a Sciencetech technical sales representative.

$ 901.00

16 bit AD board to be used with Sciencetech (up to) 8 point alignment sensors.

$ 1,000.00

This option includes all cables, and USB data acquisition device. The Sci-Spec Windows application software to interface a Sciencetech photon counting PMT detector to a Windows Based PC is required and is sold separately. Such detectors output digital signals through a BNC connector which then gets counted and digitized over USB via a computer interface. A power supply for the detector itself is also required, but is sold with the detector

$ 1,000.00