Standard USD Pricelist
Sign in
x
Toggle navigation
Home
Products
Light Sources
Xe Arc Lamp Light Source
Low Power Xe 75W - 150W
Medium Power Xe 300W
High Power Xe 500W - 1600W
Ultra High Power Xe 3000W - 7000W
Deuterium Light Sources
QTH Light Sources
Tunable Light Sources
Calibration Light Sources
Infrared Light Sources
Solar Simulators
Steady State Solar Simulator
Ultra High Efficiency Solar Simulators
Fully Reflective Solar Simulators
Low Cost Solar Simulators
Highly Collimated Solar Simulators
Large Area Solar Simulators
UV Solar Simulators
Fiberized Solar Simulators
High Flux & Concentrator Solar Simulators
Flash Solar Simulators
Large Area Flash Solar Simulators
Highly Collimated Flash Solar Simulators
Concentrator Flash Solar Simulators
Solar Cell IV Testing Equipment
Solar Cell IV Testing Equipment for Steady State Solar Simulators
Solar Cell IV Testing Equipment for Flash Solar Simulators
Quantum Efficiency
Modular Spectrometers
FTIR Spectrometers
Monochromators and Spectrographs
Small Series
Standard Series
High Resolution Series
Integrated and Modular Systems
Spectroradiometer For Detector Characterization
Spectrophotometry
Fluorescence Spectroscopy
Raman Spectroscopy
LIBS Spectrometer
Far Infrared Systems (THz)
Far Infrared Spectrometers
Electrochemical Workstations
Potentiostats
Addons Cards
External Potentiostats
Probes
Multiplexers
Extension and Cell Kits
Photoelectrochemistry & Photovoltaic
Electronic Loads
Upgrades
Accessories / Parts
Cell Chucks
Data Acquisition Equipment
Other Accessories
Sample Chambers
Software
Power Supply
Calibration Cells and Power Meters
Detectors
Single Channel Detector
Line and Area Detectors
Lamps
Xenon Short Arc Lamps
Mercury Xenon Short Arc Lamp
Mercury Short Arc Lamps
QTH Lamps
Infrared Lamps
Optical Components
Bandpass Filters
Filters
Gratings
Filters for Solar Simulation
Reflectors
Optical Coupling Assemblies
Optomechanical
Integrating Spheres
Slit Assemblies
Beam Turning Units
Filter Holders
Filter Wheels
Shutter Assemblies
Optical Choppers
Adapters and Connectors
True
Custom Solutions
Custom Solutions Overview
Success Stories
Custom Capabilities
Applications
Photovoltaic Testing Equipment
Space Environment Simulation
Solar Simulators for Materials Testing
Solar Thermal Applications
About Us
Contact us
Sales Contact
Representatives
Support Contact
Knowledge Centre
Solar Simulator
IV Measurement
Quantum Efficiency
Accessories / Parts
Cell Chucks
Data Acquisition Equipment
Other Accessories
Sample Chambers
Software
Power Supply
Calibration Cells and Power Meters
Detectors
Lamps
Optical Components
Optomechanical
View As
2
4
Prev
5
6
7
8
9
10
11
Next
Filter
View Filter
show
16
20
Sort by
Price
Price
Name
X
Product Category
View Filter
All Products
Light Sources
Xe Arc Lamp Light Source
Low Power Xe 75W - 150W
Medium Power Xe 300W
High Power Xe 500W - 1600W
Ultra High Power Xe 3000W - 7000W
Deuterium Light Sources
QTH Light Sources
Tunable Light Sources
Calibration Light Sources
Infrared Light Sources
Solar Simulators
Steady State Solar Simulator
Ultra High Efficiency Solar Simulators
Fully Reflective Solar Simulators
Low Cost Solar Simulators
Highly Collimated Solar Simulators
Large Area Solar Simulators
UV Solar Simulators
Fiberized Solar Simulators
High Flux & Concentrator Solar Simulators
Flash Solar Simulators
Large Area Flash Solar Simulators
Highly Collimated Flash Solar Simulators
Concentrator Flash Solar Simulators
Solar Cell IV Testing Equipment
Solar Cell IV Testing Equipment for Steady State Solar Simulators
Solar Cell IV Testing Equipment for Flash Solar Simulators
Quantum Efficiency
Modular Spectrometers
FTIR Spectrometers
Monochromators and Spectrographs
Small Series
Standard Series
High Resolution Series
Integrated and Modular Systems
Spectroradiometer For Detector Characterization
Spectrophotometry
Fluorescence Spectroscopy
Raman Spectroscopy
LIBS Spectrometer
Far Infrared Systems (THz)
Far Infrared Spectrometers
Electrochemical Workstations
Potentiostats
Addons Cards
External Potentiostats
Probes
Multiplexers
Extension and Cell Kits
Photoelectrochemistry & Photovoltaic
Electronic Loads
Upgrades
Accessories / Parts
Cell Chucks
Data Acquisition Equipment
Other Accessories
Sample Chambers
Software
Power Supply
Calibration Cells and Power Meters
Detectors
Single Channel Detector
Line and Area Detectors
Lamps
Xenon Short Arc Lamps
Mercury Xenon Short Arc Lamp
Mercury Short Arc Lamps
QTH Lamps
Infrared Lamps
Optical Components
Bandpass Filters
Filters
Gratings
Filters for Solar Simulation
Reflectors
Optical Coupling Assemblies
Optomechanical
Integrating Spheres
Slit Assemblies
Beam Turning Units
Filter Holders
Filter Wheels
Shutter Assemblies
Optical Choppers
Adapters and Connectors
Filter By
Brands
(Clear all)
Bole Solutions / Bohui Prototypes Ltd.
Brady Canada
Huizhou LinTai Industrial Co.,LTD
Identifab Industries Ltd.
Lee Spring
ProjecTech Inc.
Sound Town
StayOnline
Tapmatic
Tyson Tool
X2 Robotics
Zahner-elektrik GmbH & Co.KG
Price Filter
$
-
$
x
Clear all
x
Filter Option
Grating, Ruled 64x64x9.5mm 1200l/mm @ 500nm
.Substrate dimensions: 68 x 68 x 9.5 mm
Clear aperture: 64 x 64 mm
$
850.00
In stock
.Substrate dimensions: 68 x 68 x 9.5 mm
Clear aperture: 64 x 64 mm
$
850.00
850.0
USD
Price Valid only in North America
Lamp Bulb, XBO 450W OFR
This one of the standard Xenon lamp recommended for the Model 500-500 Power Supply. Although it is rated at 450W, it can be driven at 500W with little effect on its service life. (18V 25A, 1300cd, avg life 2000 hours, length 260mm)
$
868.00
In stock
This one of the standard Xenon lamp recommended for the Model 500-500 Power Supply. Although it is rated at 450W, it can be driven at 500W with little effect on its service life. (18V 25A, 1300cd, avg life 2000 hours, length 260mm)
$
868.00
868.0
USD
Price Valid only in North America
(CON2-2L-FS) Custom F-matched 2" Beam Condensing Assembly - Fused Silica (UV Applications)
This assembly is a custom F/# matched lens assembly. It is a double lens assembly of 2" diameter PCX lenses.
Lens material is Fused Quartz or Fused Silica depending on availability.
Specify required F/# at time of ordering. F/# can be set from F/0.8 to F/10.0
Lenses mounted in 2.2" diameter coupling tube. Accessories and adapters for coupling available.
$
881.00
In stock
This assembly is a custom F/# matched lens assembly. It is a double lens assembly of 2" diameter PCX lenses.
Lens material is Fused Quartz or Fused Silica depending on availability.
Specify required F/# at time of ordering. F/# can be set from F/0.8 to F/10.0
Lenses mounted in 2.2" diameter coupling tube. Accessories and adapters for coupling available.
$
881.00
881.0
USD
Price Valid only in North America
(XE500) Lamp Bulb, 500W Xenon Arc, Ozone Free
A 500W Xenon arc lamp.
Nominal Current 28.0A
Nominal Voltage: 17.0V
Anode base SFa16-8 (8mm stud)
Cathode base SFa15-10 (10mm stud)
$
895.00
In stock
A 500W Xenon arc lamp.
Nominal Current 28.0A
Nominal Voltage: 17.0V
Anode base SFa16-8 (8mm stud)
Cathode base SFa15-10 (10mm stud)
$
895.00
895.0
USD
Price Valid only in North America
(SCI-SCC6-B) 6.5" x 6.5" (16.5 x 16.5cm) Solar Cell Chuck, Uncooled, Rear Contact
The SCI-SCC6-B cell chuck is an economical way of providing electrical connection to the back of your test cells. It is compatible with all of Sciencetech's probe systems except the SCP-MP-T and SCP-MP-G. It is not capable of vacuum hold down.
Working Area: 6" x 6"
Temperature Range: N/A
Power Input: N/A
Power Usage: N/A
Options: N/A
$
898.00
In stock
The SCI-SCC6-B cell chuck is an economical way of providing electrical connection to the back of your test cells. It is compatible with all of Sciencetech's probe systems except the SCP-MP-T and SCP-MP-G. It is not capable of vacuum hold down.
Working Area: 6" x 6"
Temperature Range: N/A
Power Input: N/A
Power Usage: N/A
Options: N/A
$
898.00
898.0
USD
Price Valid only in North America
(611-EXIGN) external igniter for 611 power supply
The 611-EXIGN is an external igniter for the 611 series power supply. The 611-EXIGN is designed for integtration of the 611 series supply with custom or third party Xenon short arc lamp houses. The 611-EXIGN connects to the 611 series supply with the standard 611-CABLE. non-terminated HV wires are supplied for connecting the 611-EXIGN to the third party lamp house.
WARNING! HV is very dangerous. The 611-EXIGN is capable of delivering a >30kV pulse.
$
900.00
In stock
The 611-EXIGN is an external igniter for the 611 series power supply. The 611-EXIGN is designed for integtration of the 611 series supply with custom or third party Xenon short arc lamp houses. The 611-EXIGN connects to the 611 series supply with the standard 611-CABLE. non-terminated HV wires are supplied for connecting the 611-EXIGN to the third party lamp house.
WARNING! HV is very dangerous. The 611-EXIGN is capable of delivering a >30kV pulse.
$
900.00
900.0
USD
Price Valid only in North America
UVA Filter- Schott UG11 & WG335/WG345 (2" with Frame)
Sun Screen Testing Industry standard filters for isolating UVA wavelengths (320-400nm)
Schott UG11 Filter for eliminating visible and infrared rays (>400nm)
Schott WG335/3mm or WG345/1mm filter for eliminating UVB and UVC rays (<320nm)
Used in the UVA Protection Factor Test Method (Persistent Pigment Darkening)
$
900.00
In stock
Sun Screen Testing Industry standard filters for isolating UVA wavelengths (320-400nm)
Schott UG11 Filter for eliminating visible and infrared rays (>400nm)
Schott WG335/3mm or WG345/1mm filter for eliminating UVB and UVC rays (<320nm)
Used in the UVA Protection Factor Test Method (Persistent Pigment Darkening)
$
900.00
900.0
USD
Price Valid only in North America
(SCI-DAS-16USB) 16-bit AD Digitization (USB), up to 50Ks/S, 3 Analog Inputs, 1 multipurpose Digital Input/Output
This 16bit data aquisition module features 3 analog inputs via BNC connectors. The data aquisition board is 16Bit and can measure a single channel up to 50Ks/S. An additional BNC connector for a multi-purpose digital input/output can be used to time measurements and/or send signals to external hardware such as a high speed shutter.
This module includes 1 BNC cable and 1 USB cable so that it is ready to interface with a single channel detector such as a PMT or UVSi photodiode detector (sold seperatley). For spectroscopy systems the Sci-Spec Windows application software to interface with a Windows Based PC is required and is sold separately.
multi-channel dataaquisition is possible using SciSpec software, if this option is required please speak to a Sciencetech technical sales representative.
$
901.00
In stock
This 16bit data aquisition module features 3 analog inputs via BNC connectors. The data aquisition board is 16Bit and can measure a single channel up to 50Ks/S. An additional BNC connector for a multi-purpose digital input/output can be used to time measurements and/or send signals to external hardware such as a high speed shutter.
This module includes 1 BNC cable and 1 USB cable so that it is ready to interface with a single channel detector such as a PMT or UVSi photodiode detector (sold seperatley). For spectroscopy systems the Sci-Spec Windows application software to interface with a Windows Based PC is required and is sold separately.
multi-channel dataaquisition is possible using SciSpec software, if this option is required please speak to a Sciencetech technical sales representative.
$
901.00
901.0
USD
Price Valid only in North America
(CO-CM-Glass) Optical Coupling For Sample Chamber to Monochromator/Spectrograph - Glass Lens
Sciencetech's sample chambers can be connected to either the input or output port of a Sciencetech monochromator/spectrograph. The coupling tube that connects them together is 1" in diameter, and has one lens with a matching monochromator F number. When the sample chamber is connected to the input port of a monochromator/spectrograph, collimated light from the sample chamber is then focused into the slit of the monochromator matching its input F number using a single lens. When the sample chamber is connected to the output port of a monochromator, the output light of the monochromator is collected by a single lens with matching output F number and then collimated for entry into the sample chamber.
This product includes the F-matching lens, tubes, and mechanical connections required to couple the sample chamber to the monochromator. Please specify if this will be an input or output coupling when ordering. This product will only work for Sciencetech's line of sample chambers: for custom optical coupling, please speak with your authorized Sciencetech technical sales staff member.
$
909.00
In stock
Sciencetech's sample chambers can be connected to either the input or output port of a Sciencetech monochromator/spectrograph. The coupling tube that connects them together is 1" in diameter, and has one lens with a matching monochromator F number. When the sample chamber is connected to the input port of a monochromator/spectrograph, collimated light from the sample chamber is then focused into the slit of the monochromator matching its input F number using a single lens. When the sample chamber is connected to the output port of a monochromator, the output light of the monochromator is collected by a single lens with matching output F number and then collimated for entry into the sample chamber.
This product includes the F-matching lens, tubes, and mechanical connections required to couple the sample chamber to the monochromator. Please specify if this will be an input or output coupling when ordering. This product will only work for Sciencetech's line of sample chambers: for custom optical coupling, please speak with your authorized Sciencetech technical sales staff member.
$
909.00
909.0
USD
Price Valid only in North America
(CO-CM-FS1) Optical Coupling For Sample Chamber to Monochromator/Spectrograph - Fused Silica Lens (UV)
Sciencetech's sample chambers can be connected to either the input or output port of a Sciencetech monochromator/spectrograph. The coupling tube that connects them together is 1" in diameter, and has one lens with a matching monochromator F number. When the sample chamber is connected to the input port of a monochromator/spectrograph, collimated light from the sample chamber is then focused into the slit of the monochromator matching its input F number using a single lens. When the sample chamber is connected to the output port of a monochromator, the output light of the monochromator is collected by a single lens with matching output F number and then collimated for entry into the sample chamber.
This product includes the F-matching lens, tubes, and mechanical connections required to couple the sample chamber to the monochromator. Please specify if this will be an input or output coupling when ordering. This product will only work for Sciencetech's line of sample chambers: for custom optical coupling, please speak with your authorized Sciencetech technical sales staff member.
$
909.00
In stock
Sciencetech's sample chambers can be connected to either the input or output port of a Sciencetech monochromator/spectrograph. The coupling tube that connects them together is 1" in diameter, and has one lens with a matching monochromator F number. When the sample chamber is connected to the input port of a monochromator/spectrograph, collimated light from the sample chamber is then focused into the slit of the monochromator matching its input F number using a single lens. When the sample chamber is connected to the output port of a monochromator, the output light of the monochromator is collected by a single lens with matching output F number and then collimated for entry into the sample chamber.
This product includes the F-matching lens, tubes, and mechanical connections required to couple the sample chamber to the monochromator. Please specify if this will be an input or output coupling when ordering. This product will only work for Sciencetech's line of sample chambers: for custom optical coupling, please speak with your authorized Sciencetech technical sales staff member.
$
909.00
909.0
USD
Price Valid only in North America
(500-AS) Replacement for 500-IG igniter
Replacement igniter for the obsolete 500-IG igniter. The 500-IG igniter was used with Sciencetech 550-200 power supplies.
The 500-AS replacement igniter connects to the 550-200 power supply with the standard 3-pin cable used by the 500-IG igniter. The different ready voltage technology used by this igniter requires a second connection using the standard Sciencetech 4-pin interlock cable (included). The igniter connects to Sciencetech 200F-100 and 201C-100 type lamphouses using the same banana jacks and a second 4-pin interlock cable.
$
925.00
In stock
Replacement igniter for the obsolete 500-IG igniter. The 500-IG igniter was used with Sciencetech 550-200 power supplies.
The 500-AS replacement igniter connects to the 550-200 power supply with the standard 3-pin cable used by the 500-IG igniter. The different ready voltage technology used by this igniter requires a second connection using the standard Sciencetech 4-pin interlock cable (included). The igniter connects to Sciencetech 200F-100 and 201C-100 type lamphouses using the same banana jacks and a second 4-pin interlock cable.
$
925.00
925.0
USD
Price Valid only in North America
(SCP-SP-T) Screw-Adjustable Micropositioning Probe with Magnetic Base (0.3" Travel) w/ Tungsten Needle-Tip Probe
Sciencetech's (SCP-SP-T) is a micropositioning probe station with a magnetic base and a tungsten needle-tip probe. It utilizes thumbscrews for adjustment. 0.3” is the magnitude of fine adjustment for this probe.
Tungsten needle-tip probes are an excellent choice for applications requiring highly accurate, fine probe placement.
$
930.00
In stock
Sciencetech's (SCP-SP-T) is a micropositioning probe station with a magnetic base and a tungsten needle-tip probe. It utilizes thumbscrews for adjustment. 0.3” is the magnitude of fine adjustment for this probe.
Tungsten needle-tip probes are an excellent choice for applications requiring highly accurate, fine probe placement.
$
930.00
930.0
USD
Price Valid only in North America
(500-GLO) Variable DC Power Supply
This power supply is designed for use with Sciencetech's line of IR sources (including, but not limited to, the Globar, and several of our infrared emitter coils). If you are uncertain if this is the correct power supply for your system, please speak with your authorized Sciencetech technical sales staff member.
$
940.00
In stock
This power supply is designed for use with Sciencetech's line of IR sources (including, but not limited to, the Globar, and several of our infrared emitter coils). If you are uncertain if this is the correct power supply for your system, please speak with your authorized Sciencetech technical sales staff member.
$
940.00
940.0
USD
Price Valid only in North America
(MR64-G) F/4 Off-axis Parabolic Collimating Mirror Assembly for LH-S Housing- Protected Gold
An F/4 off-axis parabolic mirror assembly with protected gold mirror coating. This assembly is intended to attach to Sciencetech's LH-S lamp houses (also works with obsolete 201C-100 lamp houses). The assembly includes a kinematic three point adjuster to optimize optical alignment. A standard hole pattern on the input and output ends of the assembly can be used to mount this optical component to custom or third party systems with appropriate bracketing.
$
950.00
In stock
An F/4 off-axis parabolic mirror assembly with protected gold mirror coating. This assembly is intended to attach to Sciencetech's LH-S lamp houses (also works with obsolete 201C-100 lamp houses). The assembly includes a kinematic three point adjuster to optimize optical alignment. A standard hole pattern on the input and output ends of the assembly can be used to mount this optical component to custom or third party systems with appropriate bracketing.
$
950.00
950.0
USD
Price Valid only in North America
Lamp Bulb, 150W Xenon for SS150 Solar Simulator
This 150W Xe bulb is recommended for Sciencetch solar simulator model SS150 only. It is a specially designed lamp to improve the uniformity of the SS150.
$
957.00
In stock
This 150W Xe bulb is recommended for Sciencetch solar simulator model SS150 only. It is a specially designed lamp to improve the uniformity of the SS150.
$
957.00
957.0
USD
Price Valid only in North America
(SCP-4T) Probe Station, 4 Probes, Tungsten Needle-tip Kelvin Probes
Sciencetech's (SCP-4T) is an economical probe station that provides 4 tungsten needle-tip probes to provide contacts to the top surface of your test device.
Tungsten needle-tip probes are an excellent choice for applications requiring highly accurate, fine probe placement.
$
960.00
In stock
Sciencetech's (SCP-4T) is an economical probe station that provides 4 tungsten needle-tip probes to provide contacts to the top surface of your test device.
Tungsten needle-tip probes are an excellent choice for applications requiring highly accurate, fine probe placement.
$
960.00
960.0
USD
Price Valid only in North America
(XE300) Lamp Bulb, 300W Xenon Short Arc
A replacement 300W short arc xenon bulb.
Average lifetime = 1000hrs
$
960.00
In stock
A replacement 300W short arc xenon bulb.
Average lifetime = 1000hrs
$
960.00
960.0
USD
Price Valid only in North America
(SCP-SP-G) Screw-Adjustable Micropositioning Probe with Magnetic Base (0.3" Travel) w/ Gold-Plated Spring Probe
Sciencetech’s (SCP-SP-G) is a micropositioning probe station with a magnetic base and a gold-plated spring probe. It utilizes thumbscrews for adjustment. 0.3” is the magnitude of fine adjustment for this probe.
Gold spring probes are an excellent choice for most applications, with the probe tip gently contacting the surface of your test device. For applications requiring finer probe placement, please see our tungsten needle-tip probe stations.
$
970.00
In stock
Sciencetech’s (SCP-SP-G) is a micropositioning probe station with a magnetic base and a gold-plated spring probe. It utilizes thumbscrews for adjustment. 0.3” is the magnitude of fine adjustment for this probe.
Gold spring probes are an excellent choice for most applications, with the probe tip gently contacting the surface of your test device. For applications requiring finer probe placement, please see our tungsten needle-tip probe stations.
$
970.00
970.0
USD
Price Valid only in North America
(SH-SC3) Automated Shutter, 2.5" Clear Aperture
Open/ close time ~200ms.
Automated with 601 or 611 series power supplies
Designed for use with the SciSun solar simulator
$
1,000.00
Open/ close time ~200ms.
Automated with 601 or 611 series power supplies
Designed for use with the SciSun solar simulator
$
1,000.00
1000.0
USD
Price Valid only in North America
(SCI-DAS-16USB-8P) 16-bit AD Digitization (USB) for NU Alignment Sensors
16 bit AD board to be used with Sciencetech (up to) 8 point alignment sensors.
$
1,000.00
In stock
16 bit AD board to be used with Sciencetech (up to) 8 point alignment sensors.
$
1,000.00
1000.0
USD
Price Valid only in North America
Prev
5
6
7
8
9
10
11
Next
Prev
5
6
7
8
9
10
11
Next
Copyright
©
Sciencetech