Shop | Sciencetech Inc.
Standard USD Pricelist

  • x

    Addons Cards

    The capabilities of a potentiostats can be extended via numerous addon cards. These extension cards provide additional measurement or control signals (like temperature, voltage or pH etc.) which can be recorded during measurement or can be used as a trigger to start a measurement. Other extension cards interface external potentiostats and loads, adds sequential multichannel or parallel EIS channels.

    2 4
    Filter View Filter
    Sort by
    X

    Product Category

    View Filter
    • Filter By
      Brands
      (Clear all)
      • Price Filter
      $ - $
    x
    Clear all x

    Filter Option

    The MIO addon card provides four analog output channels with a voltage range of ±10 V. In addition the MIO card is also equipped with four isolated digital input and four isolated digital relay output channels. The MIO addon card is used to receive and send trigger signals between the ZENNIUM potentiostats and a third party device.

    -Remote Integration possible
    -Can be controlled in Thales or script software

    For pricing information, please request a quotation from sales@sciencetech-inc.com.
    The MIO addon card provides four analog output channels with a voltage range of ±10 V. In addition the MIO card is also equipped with four isolated digital input and four isolated digital relay output channels. The MIO addon card is used to receive and send trigger signals between the ZENNIUM potentiostats and a third party device.

    -Remote Integration possible
    -Can be controlled in Thales or script software

    For pricing information, please request a quotation from sales@sciencetech-inc.com.
    $ 1,200.00 1200.0 USD
    Price Valid only in North America

    Zahner's TEMP-U2 enables the temperature measurements by direct connection of two thermocouples. Two additional voltage input channels are available and provide the opportunity to record additional variables during the electrochemical measurement. For example, the voltage channels can be configured with a pH electrode or a pressure chamber to record the pH value or chamber pressure during the measurement.

    Unless otherwise requested, the TEMP-U is delivered pre-configured for two NiCrNi (type K) thermocouples and two voltage inputs in the range of ±8 V.

    -2 thermocouple inputs
    -2 analog voltage inputs

    For pricing information, please request a quotation from sales@sciencetech-inc.com.
    Zahner's TEMP-U2 enables the temperature measurements by direct connection of two thermocouples. Two additional voltage input channels are available and provide the opportunity to record additional variables during the electrochemical measurement. For example, the voltage channels can be configured with a pH electrode or a pressure chamber to record the pH value or chamber pressure during the measurement.

    Unless otherwise requested, the TEMP-U is delivered pre-configured for two NiCrNi (type K) thermocouples and two voltage inputs in the range of ±8 V.

    -2 thermocouple inputs
    -2 analog voltage inputs

    For pricing information, please request a quotation from sales@sciencetech-inc.com.
    $ 1,328.00 1328.0 USD
    Price Valid only in North America

    The EPC42 is the link between the ZENNIUM potentiostat and the power and auxiliary potentiostats or electronic loads. One EPC42 card can address up to four PP/EL/XPOT devices sequentially. Up to four EPC42 cards can be installed in a ZENNIUM X and ZENNIUM PRO potentiostat. In total, a ZENNIUM series potentiostat can be simultaneously connected with up to 16 external PPs/ELs, which can be controlled sequentially.

    -Control up to 16 external potentiostats and loads

    For pricing information, please request a quotation from sales@sciencetech-inc.com.
    The EPC42 is the link between the ZENNIUM potentiostat and the power and auxiliary potentiostats or electronic loads. One EPC42 card can address up to four PP/EL/XPOT devices sequentially. Up to four EPC42 cards can be installed in a ZENNIUM X and ZENNIUM PRO potentiostat. In total, a ZENNIUM series potentiostat can be simultaneously connected with up to 16 external PPs/ELs, which can be controlled sequentially.

    -Control up to 16 external potentiostats and loads

    For pricing information, please request a quotation from sales@sciencetech-inc.com.
    $ 1,334.00 1334.0 USD
    Price Valid only in North America

    The Zahner PAD4 card provides 4 additional voltage or current input channels which can be used for parallel DC or EIS measurements on segments connected in series. The PAD4 card is an optimal addition to the ZENNIUM potentiostat for stack measurements or segmented cells.

    The PAD4 card is used in the fuel cell, electrolyzer stack and battery-pack investigations. In addition, it is used in measurements involving a reference electrode in a 3-electrode cell connection scheme.

    Parallel EIS measurements on each segment in a stack enable highly detailed measurement system behavior either in-plane or throughout the stack. Up to 17 EIS signals can be recorded in a frequency range of 10 µHz to 250 kHz. 18-bit AD converters ensure high-quality EIS data.

    Overview of PAD4 card variants:
    PAD4-HC: for investigation of individual cells in a stack of up to ±100V
    PAD4-LC: for investigation of segmented cells in a stack of up to ±25 V
    PAD4-HZ: for investigation of batteries with high-resistance reference electrodes or high-resistance objects

    -Parallel EIS stack measurements
    -Up to 17 channels for ZENNIUM X
    -Up to 5 channels for ZENNIUM PRO
    -Customizable voltage range for PAD4 channels
    -Incorporated with external potentiostats and electronic loads
    -3 different models for stacks and segmented cells

    For pricing information, please request a quotation from sales@sciencetech-inc.com.
    The Zahner PAD4 card provides 4 additional voltage or current input channels which can be used for parallel DC or EIS measurements on segments connected in series. The PAD4 card is an optimal addition to the ZENNIUM potentiostat for stack measurements or segmented cells.

    The PAD4 card is used in the fuel cell, electrolyzer stack and battery-pack investigations. In addition, it is used in measurements involving a reference electrode in a 3-electrode cell connection scheme.

    Parallel EIS measurements on each segment in a stack enable highly detailed measurement system behavior either in-plane or throughout the stack. Up to 17 EIS signals can be recorded in a frequency range of 10 µHz to 250 kHz. 18-bit AD converters ensure high-quality EIS data.

    Overview of PAD4 card variants:
    PAD4-HC: for investigation of individual cells in a stack of up to ±100V
    PAD4-LC: for investigation of segmented cells in a stack of up to ±25 V
    PAD4-HZ: for investigation of batteries with high-resistance reference electrodes or high-resistance objects

    -Parallel EIS stack measurements
    -Up to 17 channels for ZENNIUM X
    -Up to 5 channels for ZENNIUM PRO
    -Customizable voltage range for PAD4 channels
    -Incorporated with external potentiostats and electronic loads
    -3 different models for stacks and segmented cells

    For pricing information, please request a quotation from sales@sciencetech-inc.com.
    $ 5,153.00 5153.0 USD
    Price Valid only in North America

    The TR8M addon card allows fast measurements of pulses or transients with a high sampling rate of up to 40 MHz. Together with a Pulse Probe and an external potentiostat or electronic load, high current interrupt measurements may also be performed.

    -Two channels with sampling rate up to 20 MHz
    -One channel with sampling rate up to 40 MHz
    -Internal and external signals

    For pricing information, please request a quotation from sales@sciencetech-inc.com.
    The TR8M addon card allows fast measurements of pulses or transients with a high sampling rate of up to 40 MHz. Together with a Pulse Probe and an external potentiostat or electronic load, high current interrupt measurements may also be performed.

    -Two channels with sampling rate up to 20 MHz
    -One channel with sampling rate up to 40 MHz
    -Internal and external signals

    For pricing information, please request a quotation from sales@sciencetech-inc.com.
    $ 6,878.00 6878.0 USD
    Price Valid only in North America
    Copyright © Sciencetech