Accessories / Parts

The SCC-12 cell chuck is an economical way of providing electrical connection to your test cells. It has a conductive tin-plated copper base plate (gold plating available) and is compatible with all of Sciencetech's probe systems. The cell chuck is capable of vacuum hold down (vacuum pump sold separately).

Working Area: 30 × 30 cm (12" × 12")
Baseplate Size: 33 × 33 cm (13.25" × 13.25")
Temperature Range: N/A
Power Input: N/A
Power Usage: N/A
Options: Vacuum Pump

$ 2,827.00

This product consists of the Sciencetech SOL-METER and our SSIVT-REF sun calibrated reference detector. The SOL-METER is a digital meter for use with select solar calibrated detectors. The meter converts detector measurements to a Sun value. This handheld meter is compact, has a sturdy design, and is appropriate for indoor or outdoor applications.

The Sciencetech Reference Detector, SSIVT-REF, which is an integral part of solar simulator calibration and solar cell I-V characterization, consists of a single element silicon detector and is designed to be used for monitoring and verifying the Sun level of solar simulators. The SSIVT-REF detector is used effective in sensing wavelengths between 190 nm and 1100 nm and is calibrated at Sciencetech against a NIST traceable calibrated reference cell. It does not have the capability for temperature measurement.

The SOL-METER is also compatible with detector model SOL-REF-Q. For temperature measurement in addition to irradiance measurements, please see the SOL-METER and SOL-REF-Q.

This product comes with a detachable cable with 4 banana plugs for connecting to a measurement device and is CE-compliant.

Rise time: 0.2 μs
Effective active area: 5.7 sq mm
Dimensions: 50.8 x 50.8 x 25.4 mm

$ 2,828.00

6500W Xenon arc lamp
Ozone Free
Compatible with Sciencetech Ultra-High Power Lamp Houses.

Nominal Wattage 6500 W
Nominal Voltage 39 V
Current (A) 165 A
Current Control Range (A) 133-173 A

Physical attributes
Base Anode SFAx30-14
Base Cathode SFa30-7.9

Contact for Pricing

Sciencetech's cell chucks are made from copper and plated with tin for good electrical conductivity, corrosion resistance, and durability. Our cell chucks can be upgraded to have an additional gold coating on request.

Contact for Pricing

The SS-80-M is a motorized adjustable slit for the input or output port of a Sciencetech monochromator. The slit width can be adjusted between 0-6 mm using the computer controlled actuator. The height of the SS80 slit can also be adjusted between 0-10 mm, 10-20 mm and 20-30 mm through built-in manual curtain sliders. The SS-80-M motorized slit comes with Sciencetech SciSlit software for controlling the slit. See the product brochure for more information on the slit accuracy and step size.

$ 3,018.00

As an arc lamp ages, the output intensity slowly declines. This natural lamp aging can be compensated for by using this light intensity stabilizer, which operates by increasing the power level on the variable power supply, using feedback from an optical sensor.

This stabilizer is meant to stabilize the light output on a time scale of hours or days, useful for longer-running experiments. It does not improve temporal instability on the order of seconds (or even a single hour).

This light intensity stabilizer is compatible with Sciencetech's computer-controlled xenon arc lamp power supplies and housings (PS-XE###-A-T). This product is not compatible with manually-controlled power supplies (PS-XE###-A-M).

$ 3,029.00

This rotating-blade chopper has a 1" diameter opening on one face and a 2" diameter opening on the opposite face. The blade is positioned closest to the 1" face. Either opening can be used as the input or output, depending on the configuration of your system.
This chopper is usually used in cases where a converging beam enters the chopper housing from a 2" optical tube and then is coupled to a monochromator. In this case, the 2" opening is coupled to the lamp housing and the 1" opening is coupled to the monochromator input. It could be used in the reverse orientation for a diverging beam.
For collimated inputs, this chopper accepts a maximum 1" diameter beam, but the CH-MC-E-1D1D chopper is usually used for this application instead.

The 1" face has a 1-D slip ring with H4 hole pattern.
The 2" face has a 2-D slip ring with S4 hole pattern.
This system includes a 2-slot blade for frequency range of 4-200 Hz. Higher frequency ranges are available with other blades.
Includes enclosure and driver.
This chopper is compatible with SciSpec and SciPV software.
For integration into Sciencetech instruments or larger integrated systems, see SciencetechCOM and SciAX software.
Third party control software is included with this chopper but is not supported by Sciencetech.

Contact for Pricing

The SS-84-M is a High Resolution motorized adjustable slit for the input or output port of a Sciencetech monochromator. The slit width can be adjusted between 0-6 mm using the computer controlled actuator. The height of the SS-84 slit can also be adjusted between 0-10 mm, 10-20 mm and 20-30 mm through built-in manual curtain sliders.

This is a high resolution slit designed to have 10 um resolution. The slits are manufactured from stainless steel to maximize mechanical accuracy.

$ 3,333.00

Sciencetech's touchscreen 150 W xenon arc lamp power supply designed for use with Sciencetech's LH- series lamp housing.
This power supply features a 7W2 connection so that only one cable is required to supply all lamp power and communication to the lamp housing. This power supply also has a shutter connection and RS232 connection for electronic control of a shutter or computer control of the power supply if those optional accessories are purchased.

PS-XE150-A-T power supplies accept 110-240 VAC input.
This system includes 1 IEC 60320 C13 compatible power cable. Region-specific version must be selected at the time of placing an order (see product 491-9001).
Includes a USB to serial adapter.

Features
-single 7W2 connection for lamp power, cooling, and communication to lamp house
-easy-to-use touchscreen interface
-shutter and exposure control (if electronic shutter upgrade is ordered)
-lamp start and time log
-safety interlocks

Optional Upgrades
-RS232 computer control with GUI
-temperature monitor
-remote lamp status monitoring
-auto lamp starting

$ 3,495.00

Sciencetech's touchscreen 300 W xenon arc lamp power supply designed for use with Sciencetech's LH- series lamp housing.
This power supply features a 7W2 connection so that only one cable is required to supply all lamp power and communication to the lamp housing. This power supply also has a shutter connection and RS232 connection for electronic control of a shutter or computer control of the power supply if those optional accessories are purchased.

PS-XE300-A-T power supplies accept 110-240 VAC input.

This system includes 1 IEC 60320 C13 compatible power cable. Region-specific version must be selected at the time of placing an order (see product 491-9001).

Includes a USB to serial adapter.

Features
-single 7W2 connection for lamp power, cooling, and communication to lamp house
-easy-to-use touchscreen interface
-shutter and exposure control (if electronic shutter upgrade is ordered)
-lamp start and time log
-safety interlocks
-RS232 software GUI included, shown below

Optional Upgrades
-temperature monitor
-remote lamp status monitoring
-auto lamp starting

$ 3,495.00

TC-1000-120 is a compressor-refrigerant recirculating liquid chiller rated at 900W @25°C liquid & ambient. Chiller control is based on one of four configurable temperature set-points, including the option to lock liquid to ambient for avoiding condensation or to an external K-type thermocouple sensor (not included).

Coolant flow rate, temperature, and reservoir level are monitored.

Cooling capacity: 900W @ 25°C liquid/ambient
Temperature options: liquid set-point, external thermocouple set-point, liquid and ambient delta-T, external thermocouple and ambient delta-T; toggle °C/°F
Designed for an operational temperature range of 0-40°C (ambient and liquid)
Power input: 120VAC, 60Hz (Only)

This item contains all the necessary tubing and connections to connect to any of Sciencetech -L (liquid cooled) cell chucks.

Keep unit upright at all times, and for at least 24 hours before applying power to ensure sufficient oil reaches the compressor.

This system includes 1 IEC 60320 C13 compatible power cables. Region-specific version must be selected at the time of placing an order (see product 491-9001).

Contact for Pricing

The SCC-6-B cell chuck is an economical way of providing electrical connection to the back of your test cells. It is compatible with all of Sciencetech's probe systems except the SCP-MP-T and SCP-MP-G. It is not capable of vacuum hold down.

Working Area: 15 × 15 cm (6" × 6")
Baseplate Size: 16.5 × 16.5 cm (6.5" × 6.5")
Temperature Range: N/A
Power Input: N/A
Power Usage: N/A
Options: N/A

$ 3,534.00

TC-1000-220 is a compressor-refrigerant recirculating liquid chiller rated at 900W @25°C liquid & ambient. Chiller control is based on one of four configurable temperature set-points, including the option to lock liquid to ambient for avoiding condensation or to an external K-type thermocouple sensor (not included).

Coolant flow rate, temperature, and reservoir level are monitored.

Cooling capacity: 900W @ 25°C liquid/ambient
Temperature options: liquid set-point, external thermocouple set-point, liquid and ambient delta-T, external thermocouple and ambient delta-T; toggle °C/°F
Designed for an operational temperature range of 0-40°C (ambient and liquid)
Power input: 220VAC, 50-60Hz

This item contains all the necessary tubing and connections to connect to any of Sciencetech -L (liquid cooled) cell chucks.

Keep unit upright at all times, and for at least 24 hours before applying power to ensure sufficient oil reaches the compressor.

This system includes 1 IEC 60320 C13 compatible power cables. Region-specific version must be selected at the time of placing an order (see product 491-9001).

Contact for Pricing

Spectralon Reflective Coating Standard,( Zenith White and Gold Coating available)
1.5" diameter entrance/exit port (1), 1" diameter application ports (3) (90 degree, North Pole and 180 degree)
Additional Ports and reduction of ports possible
Internal baffle on 90 deg port

Contact for Pricing

The SCC-6-L-F cell chuck is an economical way of providing temperature control and electrical connection to your test cells. It has a conductive tin-plated copper base plate (gold plating available) and is compatible with all of Sciencetech's probe systems. The cell chuck is capable of vacuum hold-down (vacuum pump sold separately) and requires an external system to provide liquid cooling or heating that can heat or cool your test cells from dew point to 80 ºC.

The SCC-6-L-F is a reversible chuck that allows you to make electrical contacts to the back of your device under test and flip the chuck for back-illumination.

This model requires a water recirculator (for cooling only) or temperature control unit for temperature control (both sold separately).

Working Area: 15 × 15 cm (6" x 6")
Baseplate Size: 16.5 × 16.5 cm (6.5" × 6.5")
Temperature Range: 1 - 80 ºC
Power Input: 115-240VAC
Power Usage: 2W
Options: Vacuum Pump and Water Recirculator or Temperature Control Unit

$ 4,039.00

An AM1.5D 3x3" air mass filter (including filter holder) designed for Sciencetech's:
-Flash Series Solar Simulators (Class A, ASTM E927-19)

AM1.5D simulates the terrestrial solar spectrum on the ground when the sun is at a zenith angle of 48.2°. It includes only direct light from the sun, and not the diffuse light that is scattered by the atmosphere. As a result, this filter simulates the direct radiation which reaches the ground.

Contact for Pricing

Target size: 100x100mm
DAQ: 16 bit
Detector size : 20x20mm (apertured to 12.5x12.5mm)
Detector Type: SCI-REF-LR
Connectivity: 1 x USB2.0
Power Requirements: 120VAC x 4A / 220VAC x 2A
Dimensions: 200x200x125

Contact for Pricing

Sciencetech's PS-QT1000-F-M is an external 1000 W fixed power supply for QTH lamps. Sciencetech's 1000 W QTH power supply produces a highly stabilized 120 VDC low noise output and can output up to 10 A. The current output to the lamp is not adjustable with this power supply. If you require an adjustable power supply for a Sciencetech Incandescent source, see the PS-QT2500-A-T power supply.

This power supply is designed to work with Sciencetech XLH lamp houses with QTH or other resistive element type lamps having maximum voltage of 120 VDC. The power supply will operate resistive element type lamps at their nominal operating voltage and current. This will result in the lamp emitting a spectra at it's nominal colour temperature.

This power supply accepts 100-240 VAC.

This system includes 1 IEC 60320 C13 compatible power cable. Region-specific version must be selected at the time of placing an order (see product 491-9001).

$ 4,558.00

The SCC-12-L cell chuck is an economical way of providing temperature control and electrical connection to your test cells. It has a conductive tin-plated copper base plate (gold plating available) and is compatible with all of Sciencetech's probe systems. The cell chuck is capable of vacuum hold-down (vacuum pump sold separately) and requires an external system to provide liquid cooling or heating that can heat or cool your test cells between 1 and 80 ºC.

This model requires a water recirculator (for cooling only) or temperature control unit for temperature control (both sold separately).

Working Area: 30 × 30 cm (12" × 12")
Baseplate Size: 33 × 33 cm (13.25" × 13.25")
Temperature Range: 1 – 80 ºC
Power Input: 115-240VAC
Power Usage: 2W
Options: Vacuum Pump and Water Recirculator or Temperature Control Unit

$ 4,948.00

The Sciencetech Polarizing variable frequency optical chopper is used with the detectors during Martin-Puplett mode. The chopper is positioned in front of the output port, and captures the output at 45 degrees from the two planes of polarization. This facilitates the retrieval of the Fourier Transform Interferogram during M-P mode. The chopper itself is designed for high stability and a broad range of frequency control (from 0.5Hz to 100Hz). The price includes the servo motor and software controller.

Contact for Pricing