The SCI-SCC6 cell chuck is an economical way of providing electrical connection to your test cells. It has a conductive tin-plated copper base plate (gold plating available) and is compatible with all of Sciencetech's probe systems. The cell chuck is capable of vacuum hold down (vacuum pump sold separately).

Working Area: 6" x 6"
Temperature Range: N/A
Power Input: N/A
Power Usage: N/A
Options: Vacuum Pump

$ 840.00

.

$ 850.00

An F/4 off-axis parabolic mirror assembly with protected aluminum mirror coating. This assembly is intended to attach to Sciencetech's LH-S lamp houses (also works with obsolete 201C-100 lamp houses). The assembly includes a kinematic three point adjuster to optimize optical alignment. A standard hole pattern on the input and output ends of the assembly can be used to mount this optical component to custom or third party systems with appropriate bracketing.

$ 850.00

Sciencetech's Compact 1.75" Optical Liquid Filter is designed to filter wavelengths 1000nm and greater (if distilled water is used). The compact size allows it to be installed in one of Sciencetech's FH- style filter boxes. This filter requires a cooling water recirculator (sold separately).

$ 850.00

Substrate dimensions: 68 x 68 x 9.5 mm
Clear aperture: 64 x 64 mm

$ 850.00

.Substrate dimensions: 68 x 68 x 9.5 mm
Clear aperture: 64 x 64 mm

$ 850.00

Substrate dimensions: 68 x 68 x 9.5 mm
Clear aperture: 64 x 64 mm

$ 850.00

.Substrate dimensions: 68 x 68 x 9.5 mm
Clear aperture: 64 x 64 mm

$ 850.00

This one of the standard Xenon lamp recommended for the Model 500-500 Power Supply. Although it is rated at 450W, it can be driven at 500W with little effect on its service life. (18V 25A, 1300cd, avg life 2000 hours, length 260mm)

$ 868.00

This assembly is a custom F/# matched lens assembly. It is a double lens assembly of 2" diameter PCX lenses.
Lens material is Fused Quartz or Fused Silica depending on availability.
Specify required F/# at time of ordering. F/# can be set from F/0.8 to F/10.0
Lenses mounted in 2.2" diameter coupling tube. Accessories and adapters for coupling available.

$ 881.00

A 500W Xenon arc lamp.
Nominal Current 28.0A
Nominal Voltage: 17.0V
Anode base SFa16-8 (8mm stud)
Cathode base SFa15-10 (10mm stud)

$ 895.00

The SCI-SCC6-B cell chuck is an economical way of providing electrical connection to the back of your test cells. It is compatible with all of Sciencetech's probe systems except the SCP-MP-T and SCP-MP-G. It is not capable of vacuum hold down.
Working Area: 6" x 6"
Temperature Range: N/A
Power Input: N/A
Power Usage: N/A
Options: N/A

$ 898.00

The 611-EXIGN is an external igniter for the 611 series power supply. The 611-EXIGN is designed for integtration of the 611 series supply with custom or third party Xenon short arc lamp houses. The 611-EXIGN connects to the 611 series supply with the standard 611-CABLE. non-terminated HV wires are supplied for connecting the 611-EXIGN to the third party lamp house.
WARNING! HV is very dangerous. The 611-EXIGN is capable of delivering a >30kV pulse.

$ 900.00

Sun Screen Testing Industry standard filters for isolating UVA wavelengths (320-400nm)
Schott UG11 Filter for eliminating visible and infrared rays (>400nm)
Schott WG335/3mm or WG345/1mm filter for eliminating UVB and UVC rays (<320nm)
Used in the UVA Protection Factor Test Method (Persistent Pigment Darkening)

$ 900.00

This 16bit data aquisition module features 3 analog inputs via BNC connectors. The data aquisition board is 16Bit and can measure a single channel up to 50Ks/S. An additional BNC connector for a multi-purpose digital input/output can be used to time measurements and/or send signals to external hardware such as a high speed shutter.

This module includes 1 BNC cable and 1 USB cable so that it is ready to interface with a single channel detector such as a PMT or UVSi photodiode detector (sold seperatley). For spectroscopy systems the Sci-Spec Windows application software to interface with a Windows Based PC is required and is sold separately.

multi-channel dataaquisition is possible using SciSpec software, if this option is required please speak to a Sciencetech technical sales representative.

$ 901.00

Sciencetech's sample chambers can be connected to either the input or output port of a Sciencetech monochromator/spectrograph. The coupling tube that connects them together is 1" in diameter, and has one lens with a matching monochromator F number. When the sample chamber is connected to the input port of a monochromator/spectrograph, collimated light from the sample chamber is then focused into the slit of the monochromator matching its input F number using a single lens. When the sample chamber is connected to the output port of a monochromator, the output light of the monochromator is collected by a single lens with matching output F number and then collimated for entry into the sample chamber.
This product includes the F-matching lens, tubes, and mechanical connections required to couple the sample chamber to the monochromator. Please specify if this will be an input or output coupling when ordering. This product will only work for Sciencetech's line of sample chambers: for custom optical coupling, please speak with your authorized Sciencetech technical sales staff member.

$ 909.00

Sciencetech's sample chambers can be connected to either the input or output port of a Sciencetech monochromator/spectrograph. The coupling tube that connects them together is 1" in diameter, and has one lens with a matching monochromator F number. When the sample chamber is connected to the input port of a monochromator/spectrograph, collimated light from the sample chamber is then focused into the slit of the monochromator matching its input F number using a single lens. When the sample chamber is connected to the output port of a monochromator, the output light of the monochromator is collected by a single lens with matching output F number and then collimated for entry into the sample chamber.
This product includes the F-matching lens, tubes, and mechanical connections required to couple the sample chamber to the monochromator. Please specify if this will be an input or output coupling when ordering. This product will only work for Sciencetech's line of sample chambers: for custom optical coupling, please speak with your authorized Sciencetech technical sales staff member.

$ 909.00

Replacement igniter for the obsolete 500-IG igniter. The 500-IG igniter was used with Sciencetech 550-200 power supplies.
The 500-AS replacement igniter connects to the 550-200 power supply with the standard 3-pin cable used by the 500-IG igniter. The different ready voltage technology used by this igniter requires a second connection using the standard Sciencetech 4-pin interlock cable (included). The igniter connects to Sciencetech 200F-100 and 201C-100 type lamphouses using the same banana jacks and a second 4-pin interlock cable.

$ 925.00

Sciencetech's (SCP-SP-T) is a micropositioning probe station with a magnetic base and a tungsten needle-tip probe. It utilizes thumbscrews for adjustment. 0.3” is the magnitude of fine adjustment for this probe.

Tungsten needle-tip probes are an excellent choice for applications requiring highly accurate, fine probe placement.

$ 930.00

This power supply is designed for use with Sciencetech's line of IR sources (including, but not limited to, the Globar, and several of our infrared emitter coils). If you are uncertain if this is the correct power supply for your system, please speak with your authorized Sciencetech technical sales staff member.

$ 940.00