Products | Sciencetech Inc.
Standard USD Pricelist

  • x

    Sciencetech has a large selection of "stand alone" and "open architecture" off-the-shelf and custom made products for researchers using spectroscopy or working with photovoltaics. We offer technical staff to help with the development of custom systems for special applications. Since 1985, Sciencetech has manufactured Modular Instrumentation for Spectroscopy, TeraHertz FTIRs, Highly Collimated Large Solar Simulators, Flash and Continuous Solar Simulators, Photovoltaic Instrumentation, Quantum Efficiency and Spectral Response Systems, Spectrophotometers/radiometers, Monochromators, Detection Systems, and Light Sources to offer to the global research community through a network of representatives.

     here

    Light Sources

    Solar Simulators

    Quantum Efficiency

    Modular Spectrometers

    Electrochemical Workstations

    Accessories / Parts

    Sciencetech product design

    SCIENCETECH has built a reputation on custom solutions. Whether you need a small modification to an existing system or a completely novel design built from the ground up to meet your technical specifications, Sciencetech's engineering and optical design teams are ready to help.

    SCIENCETECH prides itself on our ability to build custom solutions and systems to the most exacting of specifications. Whether you need higher sensitivity, better throughput, more power, better spectral matching, higher resolution, or any other variable modified to give you exactly what you need, our team of engineers, physicists, and optical designers stand ready to provide you with a solution that will meet your technical requirements.

    SCIENCETECH'S SOLAR SIMULATORS IN ACTION - The European Commission just released an article involving the use of Sciencetech's solar simulators in their new facility. Read the full article HERE.

    2 4
    Filter View Filter
    Sort by
    X

    Product Category

    View Filter
    • Filter By
      Brands
      (Clear all)
      • Price Filter
      $ - $
    x
    Clear all x

    Filter Option

    A filter holder designed to hold any of Sciencetech's Air Mass Filters with a 3" diameter output. This filter holder also holds any 75x75mm filter. It is nominally used with filters that are 3mm thick, however less thick filter may also be used with this filter holder design
    $ 232.00
    In stock
    A filter holder designed to hold any of Sciencetech's Air Mass Filters with a 3" diameter output. This filter holder also holds any 75x75mm filter. It is nominally used with filters that are 3mm thick, however less thick filter may also be used with this filter holder design
    $ 232.00 232.0 USD
    Price Valid only in North America

    The NIR-PMT is contained in a thermally insulated, sealed-off housing evacuated to a high vacuum. Simple operation by air cooled TE cooler. It is a high sensitivity detector with a large detection area of 18mm for collimated light. It includes a HV power supply with interlock function.
    Fast response time
    Rise Time: 900 ps
    TTS: 300 ps
    This unit includes the housing, power supply, and detector components, but does not include mounting to a monochromator or sample chamber. Please include mounting separately.
    $ 44,625.00
    In stock
    The NIR-PMT is contained in a thermally insulated, sealed-off housing evacuated to a high vacuum. Simple operation by air cooled TE cooler. It is a high sensitivity detector with a large detection area of 18mm for collimated light. It includes a HV power supply with interlock function.
    Fast response time
    Rise Time: 900 ps
    TTS: 300 ps
    This unit includes the housing, power supply, and detector components, but does not include mounting to a monochromator or sample chamber. Please include mounting separately.
    $ 44,625.00 44625.0 USD
    Price Valid only in North America

    This long pass filter is made of absorbing glass. It is primarily used to remove UV light. It is effective at removing wavelengths <320nm.

    This filter is mounted in Sciencetech FT style filter mount with a 76.2mm diameter clear aperture.
    $ 400.00
    In stock
    This long pass filter is made of absorbing glass. It is primarily used to remove UV light. It is effective at removing wavelengths <320nm.

    This filter is mounted in Sciencetech FT style filter mount with a 76.2mm diameter clear aperture.
    $ 400.00 400.0 USD
    Price Valid only in North America

    .
    $ 500.00
    In stock
    .
    $ 500.00 500.0 USD
    Price Valid only in North America

    Sciencetech’s FSSP-HC-B highly collimated flash solar simulator is capable of illuminating targets up to 1.8 x 1.5m (or 1.5m diameter) with highly collimated light (up to 0.5° half angle). This allows testing of concentrated photovoltaics (CPV) or other applications requiring extremely high collimation.

    This product includes a power supply, collimating mirror, and lamp. Air mass filters are available separately (AM1.5D and AM1.5G, with additional filters available upon request). Available accessories include IV measurement systems, pre-configured host computers, and sample holding and cooling options. Please inquire with Sciencetech technical support staff about our automation and assembly line manufacturing partners.

    Spectral Match: Class A
    Spatial Non-Uniformity: Class B
    Temporal Instability: Class A
    Target Size: 1.8m × 1.5m (1 Sun)
    Working Distance: 5m
    Pulse Length: 500µs at 90% of peak intensity, and 2.5ms at 50% of peak intensity
    Collimation: 0.5° half angle
    $ 130,000.00
    In stock
    Sciencetech’s FSSP-HC-B highly collimated flash solar simulator is capable of illuminating targets up to 1.8 x 1.5m (or 1.5m diameter) with highly collimated light (up to 0.5° half angle). This allows testing of concentrated photovoltaics (CPV) or other applications requiring extremely high collimation.

    This product includes a power supply, collimating mirror, and lamp. Air mass filters are available separately (AM1.5D and AM1.5G, with additional filters available upon request). Available accessories include IV measurement systems, pre-configured host computers, and sample holding and cooling options. Please inquire with Sciencetech technical support staff about our automation and assembly line manufacturing partners.

    Spectral Match: Class A
    Spatial Non-Uniformity: Class B
    Temporal Instability: Class A
    Target Size: 1.8m × 1.5m (1 Sun)
    Working Distance: 5m
    Pulse Length: 500µs at 90% of peak intensity, and 2.5ms at 50% of peak intensity
    Collimation: 0.5° half angle
    $ 130,000.00 130000.0 USD
    Price Valid only in North America

    An adjustable mount for Sciencetech's line of calibration pen lamps.
    Power supply and pen lamp are not included. See the calibration sources brochure for more information.
    $ 450.00
    In stock
    An adjustable mount for Sciencetech's line of calibration pen lamps.
    Power supply and pen lamp are not included. See the calibration sources brochure for more information.
    $ 450.00 450.0 USD
    Price Valid only in North America

    .
    $ 3,500.00
    In stock
    .
    $ 3,500.00 3500.0 USD
    Price Valid only in North America

    .
    $ 500.00
    In stock
    .
    $ 500.00 500.0 USD
    Price Valid only in North America

    .
    $ 5,500.00
    In stock
    .
    $ 5,500.00 5500.0 USD
    Price Valid only in North America

    .
    $ 5,500.00
    In stock
    .
    $ 5,500.00 5500.0 USD
    Price Valid only in North America

    .
    $ 4,000.00
    In stock
    .
    $ 4,000.00 4000.0 USD
    Price Valid only in North America

    .
    $ 4,000.00
    In stock
    .
    $ 4,000.00 4000.0 USD
    Price Valid only in North America

    .
    $ 4,000.00
    In stock
    .
    $ 4,000.00 4000.0 USD
    Price Valid only in North America

    This four slot filter-wheel was originally designed for the US military to work in a 10^(-7) Torr vacuum environment. Today, a standard non-vacuum version and the original vacuum version are available. The vacuum version can be manufactured in a Class 10,000 clean room, fully baked out, and meets Class A cleanliness standards, at a small additional cost. Please note that the optional external control electronics is not designed to operate in a vacuum. It must operate in ambient pressure environment.
    $ 5,127.00
    In stock
    This four slot filter-wheel was originally designed for the US military to work in a 10^(-7) Torr vacuum environment. Today, a standard non-vacuum version and the original vacuum version are available. The vacuum version can be manufactured in a Class 10,000 clean room, fully baked out, and meets Class A cleanliness standards, at a small additional cost. Please note that the optional external control electronics is not designed to operate in a vacuum. It must operate in ambient pressure environment.
    $ 5,127.00 5127.0 USD
    Price Valid only in North America

    This hot mirror filters out IR light to remove thermal heat on the target. However, standard hot mirrors also remove UV light as a side-effect which mean it cannot be used in UV applications. This special hot mirror removes IR light between 730-1100nm while preserving UVA and UVB light (280-400nm) in addition to visible light. This filter is ideal for Sciencetech UV solar simulators where the filtering of thermal heat on the target is desired and preservation of UVA and UVB light is required.FT
    This filter is intended for use at 0 degree angle of incidence.

    This filter is mounted in Sciencetech FT style filter mount with a 76.2mm diameter clear aperture.

    Please note this filter does not eliminate all thermal heat in the IR range as this filter stops at 1,100nm. Hence IR heat beyond 1,100nm still pass through. To remove more IR light see Sciencetech's range of IR water filters or contact a Sciencetech application scientist to learn about other options.
    $ 600.00
    In stock
    This hot mirror filters out IR light to remove thermal heat on the target. However, standard hot mirrors also remove UV light as a side-effect which mean it cannot be used in UV applications. This special hot mirror removes IR light between 730-1100nm while preserving UVA and UVB light (280-400nm) in addition to visible light. This filter is ideal for Sciencetech UV solar simulators where the filtering of thermal heat on the target is desired and preservation of UVA and UVB light is required.FT
    This filter is intended for use at 0 degree angle of incidence.

    This filter is mounted in Sciencetech FT style filter mount with a 76.2mm diameter clear aperture.

    Please note this filter does not eliminate all thermal heat in the IR range as this filter stops at 1,100nm. Hence IR heat beyond 1,100nm still pass through. To remove more IR light see Sciencetech's range of IR water filters or contact a Sciencetech application scientist to learn about other options.
    $ 600.00 600.0 USD
    Price Valid only in North America

    An AM1.5D 3x3" air mass filter (including filter holder) designed for Sciencetech's:
    -Flash Series Solar Simulators (Class A, ASTM E927-19)

    AM1.5D simulates the terrestrial solar spectrum on the ground when the sun is at a zenith angle of 48.2°. It includes only direct light from the sun, and not the diffuse light that is scattered by the atmosphere. As a result, this filter simulates the direct radiation which reaches the ground.
    $ 4,133.00
    In stock
    An AM1.5D 3x3" air mass filter (including filter holder) designed for Sciencetech's:
    -Flash Series Solar Simulators (Class A, ASTM E927-19)

    AM1.5D simulates the terrestrial solar spectrum on the ground when the sun is at a zenith angle of 48.2°. It includes only direct light from the sun, and not the diffuse light that is scattered by the atmosphere. As a result, this filter simulates the direct radiation which reaches the ground.
    $ 4,133.00 4133.0 USD
    Price Valid only in North America

    Sciencetech's 120-9045 high speed shutter is a recommended accessory with Sciencetech's area scan CCD detectors, but can also be used with Sciencetech's LDA photodiodes or InGaAs linear array detectors. This shutter mounts inside a Sciencetech spectrograph behind the input port. Due to its sturdy steel construction, it can withstand approximately 5W/mm^2 (up to about 200 degrees Celsius). This product includes both the shutter and the controller, and can be either manually controlled (via externally mounted button) or computer controlled.
    $ 2,200.00
    In stock
    Sciencetech's 120-9045 high speed shutter is a recommended accessory with Sciencetech's area scan CCD detectors, but can also be used with Sciencetech's LDA photodiodes or InGaAs linear array detectors. This shutter mounts inside a Sciencetech spectrograph behind the input port. Due to its sturdy steel construction, it can withstand approximately 5W/mm^2 (up to about 200 degrees Celsius). This product includes both the shutter and the controller, and can be either manually controlled (via externally mounted button) or computer controlled.
    $ 2,200.00 2200.0 USD
    Price Valid only in North America

    A longpass filter has low transmission in the shortwave region (stopped) and high transmission in the longwave range (passband).
    Size: 2" diameter
    Material thickness: 3 mm
    Surface Quality: 80-50
    This filter includes the holder required to mount into Sciencetech's line of filter holders. For mounting into other applications, please speak with your authorized Sciencetech technical sales staff member.
    $ 360.00
    In stock
    A longpass filter has low transmission in the shortwave region (stopped) and high transmission in the longwave range (passband).
    Size: 2" diameter
    Material thickness: 3 mm
    Surface Quality: 80-50
    This filter includes the holder required to mount into Sciencetech's line of filter holders. For mounting into other applications, please speak with your authorized Sciencetech technical sales staff member.
    $ 360.00 360.0 USD
    Price Valid only in North America

    The CTBT-RF is designed to work with Sciencetech's line of SS solar simulators (between 500W and 2.5kW). The CTBT-RF is designed to hold 3" x 4" cold mirrors. A heat sink is mounted behind the dichroic turning mirror to capture transmitted light. The CTBT-RF turns the beam 90 degrees from the standard horizontal output.


    Four different cold mirror options exist (purchased separately):
    1) 275-375nm
    2) 325-450nm
    3) 350-550nm
    4) 450-725nm
    5) UV Enhanced aluminum mirror (250-3000nm)


    Please speak with your Sciencetech representative for ordering information.
    $ 1,350.00
    In stock
    The CTBT-RF is designed to work with Sciencetech's line of SS solar simulators (between 500W and 2.5kW). The CTBT-RF is designed to hold 3" x 4" cold mirrors. A heat sink is mounted behind the dichroic turning mirror to capture transmitted light. The CTBT-RF turns the beam 90 degrees from the standard horizontal output.


    Four different cold mirror options exist (purchased separately):
    1) 275-375nm
    2) 325-450nm
    3) 350-550nm
    4) 450-725nm
    5) UV Enhanced aluminum mirror (250-3000nm)


    Please speak with your Sciencetech representative for ordering information.
    $ 1,350.00 1350.0 USD
    Price Valid only in North America

    This filter is mounted in Sciencetech FT style filter mount with a 76.2mm diameter clear aperture.

    Visible band block, UV pass filter
    Clear aperture 3" diameter
    Pass band 280-390nm
    Blocking 420-750nm
    Interference filter
    Angle of incidence = 0 deg

    $ 2,000.00
    In stock
    This filter is mounted in Sciencetech FT style filter mount with a 76.2mm diameter clear aperture.

    Visible band block, UV pass filter
    Clear aperture 3" diameter
    Pass band 280-390nm
    Blocking 420-750nm
    Interference filter
    Angle of incidence = 0 deg

    $ 2,000.00 2000.0 USD
    Price Valid only in North America
    Copyright © Sciencetech