Accessories and Parts | Sciencetech Inc.
Standard USD Pricelist

  • x

    Accessories / Parts

    Cell Chucks
    Data Acquisition Equipment
    Other Accessories
    Sample Chambers
    Software
    Power Supply
    Calibration Cells and Power Meters
    Detectors
    Lamps
    Optical Components
    Optomechanical

    2 4
    Filter View Filter
    Sort by
    X

    Product Category

    View Filter
    • Filter By
      Brands
      (Clear all)
      • Price Filter
      $ - $
    x
    Clear all x

    Filter Option

    .
    $ 4,000.00
    In stock
    .
    $ 4,000.00 4000.0 USD
    Price Valid only in North America

    Set of 6 optical density filters in values of 0.15, 0.3, 0.4, 0.6, 0.9, and 2.5. Each is 25mm diameter and unmounted.
    These are absorption filters (as opposed to reflective neutral density).
    $ 350.00
    In stock
    Set of 6 optical density filters in values of 0.15, 0.3, 0.4, 0.6, 0.9, and 2.5. Each is 25mm diameter and unmounted.
    These are absorption filters (as opposed to reflective neutral density).
    $ 350.00 350.0 USD
    Price Valid only in North America

    .Substrate dimensions: 68 x 68 x 9.5 mm
    Clear aperture: 64 x 64 mm
    $ 2,000.00
    In stock
    .Substrate dimensions: 68 x 68 x 9.5 mm
    Clear aperture: 64 x 64 mm
    $ 2,000.00 2000.0 USD
    Price Valid only in North America

    .Substrate dimensions: 68 x 68 x 9.5 mm
    Clear aperture: 64 x 64 mm
    $ 2,000.00
    In stock
    .Substrate dimensions: 68 x 68 x 9.5 mm
    Clear aperture: 64 x 64 mm
    $ 2,000.00 2000.0 USD
    Price Valid only in North America

    .
    $ 730.00
    In stock
    .
    $ 730.00 730.0 USD
    Price Valid only in North America

    .
    $ 730.00
    In stock
    .
    $ 730.00 730.0 USD
    Price Valid only in North America

    This SMA Fiber Coupler mates a Sciencetech Beam Condensing Assembly to the input end of an SMA fiber such that the light collected is focused into the SMA fiber tip with great efficiency. The SMA Fiber Coupler screws onto the output end of the Beam Condensing Assembly. Once screwed on, the input tip of the fiber bundle is positioned at the output focal spot for optimum light collection. There are two flange sizes of the Fiber Bundle Coupler available to match the 1 and 2 inch diameter sizes of the Beam Condensing Assembly. Please note that the SMA Fiber Coupler should not be used on its own without the beam condensing assembly as otherwise the light collection efficiency from the light source will be very low.
    $ 228.00
    In stock
    This SMA Fiber Coupler mates a Sciencetech Beam Condensing Assembly to the input end of an SMA fiber such that the light collected is focused into the SMA fiber tip with great efficiency. The SMA Fiber Coupler screws onto the output end of the Beam Condensing Assembly. Once screwed on, the input tip of the fiber bundle is positioned at the output focal spot for optimum light collection. There are two flange sizes of the Fiber Bundle Coupler available to match the 1 and 2 inch diameter sizes of the Beam Condensing Assembly. Please note that the SMA Fiber Coupler should not be used on its own without the beam condensing assembly as otherwise the light collection efficiency from the light source will be very low.
    $ 228.00 228.0 USD
    Price Valid only in North America

    This coupling tube connects the Model 200-1K arc lamp housing to the Model FH-AC air-cooled dual filter holder box. Its length is designed specifically to place the air-cooled filter holder with 2" diameter filters in the converging beam of the light source. A mating flange connects this input extension coupling tube with the Model 200-1K arc lamp housing.
    $ 576.00
    In stock
    This coupling tube connects the Model 200-1K arc lamp housing to the Model FH-AC air-cooled dual filter holder box. Its length is designed specifically to place the air-cooled filter holder with 2" diameter filters in the converging beam of the light source. A mating flange connects this input extension coupling tube with the Model 200-1K arc lamp housing.
    $ 576.00 576.0 USD
    Price Valid only in North America

    This upgrade allows a Manual 9030 to be operated by computer control. It has replaced Sciencetech's older MD100 motor controllers.

    Only a single motorized upgrade is required for 9030DS, 9030DAs, or a single 9030.
    Please speak with your authorized Sciencetech technical sales staff member.
    $ 1,806.00
    In stock
    This upgrade allows a Manual 9030 to be operated by computer control. It has replaced Sciencetech's older MD100 motor controllers.

    Only a single motorized upgrade is required for 9030DS, 9030DAs, or a single 9030.
    Please speak with your authorized Sciencetech technical sales staff member.
    $ 1,806.00 1806.0 USD
    Price Valid only in North America

    Wavelength range: 250-800nm
    Dispersion: 8nm/mm (When used with 9030 monochromator)
    $ 1,495.00
    In stock
    Wavelength range: 250-800nm
    Dispersion: 8nm/mm (When used with 9030 monochromator)
    $ 1,495.00 1495.0 USD
    Price Valid only in North America

    .
    $ 500.00
    In stock
    .
    $ 500.00 500.0 USD
    Price Valid only in North America

    .
    $ 730.00
    In stock
    .
    $ 730.00 730.0 USD
    Price Valid only in North America

    .
    $ 730.00
    In stock
    .
    $ 730.00 730.0 USD
    Price Valid only in North America

    Element Size: 1mm x 1mm sq.
    Operating Wavelength: 2 – 13um
    Wavelength Peak: ~12.0um
    Wavelength Response: >= 13.0um (750cm-1)
    D* (λp,10000,1) (cmHz1/2W-1): >= 4.0^10
    Dewar Hold Time: 12 hours minimum with liquid N2
    FoV/Window: 60 degrees/ ZnSe
    Responsivity: >= 2000 (pk. (V/W))
    Resistance: 20-100 ohms
    Time Constant: ~1.0 usec
    MSL-8 side looking metal Dewar 8 hour hold time
    $ 2,935.00
    In stock
    Element Size: 1mm x 1mm sq.
    Operating Wavelength: 2 – 13um
    Wavelength Peak: ~12.0um
    Wavelength Response: >= 13.0um (750cm-1)
    D* (λp,10000,1) (cmHz1/2W-1): >= 4.0^10
    Dewar Hold Time: 12 hours minimum with liquid N2
    FoV/Window: 60 degrees/ ZnSe
    Responsivity: >= 2000 (pk. (V/W))
    Resistance: 20-100 ohms
    Time Constant: ~1.0 usec
    MSL-8 side looking metal Dewar 8 hour hold time
    $ 2,935.00 2935.0 USD
    Price Valid only in North America

    .
    $ 730.00
    In stock
    .
    $ 730.00 730.0 USD
    Price Valid only in North America

    .
    $ 500.00
    In stock
    .
    $ 500.00 500.0 USD
    Price Valid only in North America

    This is a room-temperature detector for use with the SPS-300. This includes the DTGS detector with a mounting flange, but requires the use of a dual-phase lock-in amplifier (sold separately).

    Element size: 2.0mm diameter
    Spectral bandwidth: Limited by selection of window
    Sensitivity: 133,000 V/W (HDPE window)
    Frequency Response: 8.8 - 265HZ (-3db points)
    NEP: 1x10^-10 W (100Hz, 1Hz BW)
    This is a room-temperature detector for use with the SPS-300. This includes the DTGS detector with a mounting flange, but requires the use of a dual-phase lock-in amplifier (sold separately).

    Element size: 2.0mm diameter
    Spectral bandwidth: Limited by selection of window
    Sensitivity: 133,000 V/W (HDPE window)
    Frequency Response: 8.8 - 265HZ (-3db points)
    NEP: 1x10^-10 W (100Hz, 1Hz BW)
    $ 7,200.00 7200.0 USD
    Price Valid only in North America

    Photon counting head using 28mm dia. Side on PMT. Spectral response range 185nm - 850nm. Low dark counts in UV to near IR range.
    For full technical specifications, please contact your authorized Sciencetech technical sales staff member.
    $ 3,663.00
    Photon counting head using 28mm dia. Side on PMT. Spectral response range 185nm - 850nm. Low dark counts in UV to near IR range.
    For full technical specifications, please contact your authorized Sciencetech technical sales staff member.
    $ 3,663.00 3663.0 USD
    Price Valid only in North America

    Used to allow the SS150 to direct the beam downwards, upwards, or at 90 degrees to the usual output direction (horizontal). Not included in the Vertical Stand, due to the usual arrangement of allowing the beam to aim downwards (meaning in most cases this component is not required with the vertical stand option).
    $ 570.00
    In stock
    Used to allow the SS150 to direct the beam downwards, upwards, or at 90 degrees to the usual output direction (horizontal). Not included in the Vertical Stand, due to the usual arrangement of allowing the beam to aim downwards (meaning in most cases this component is not required with the vertical stand option).
    $ 570.00 570.0 USD
    Price Valid only in North America

    This component will attach a wide variety of CCDs directly to Sciencetech's line of monochromators and/or spectrometers. For CCDs that are made by Hamamatsu, please see part # 125-8009. Please confirm with a Sciencetech representative if you are uncertain if your system requires this mount for your CCD.
    $ 2,500.00
    In stock
    This component will attach a wide variety of CCDs directly to Sciencetech's line of monochromators and/or spectrometers. For CCDs that are made by Hamamatsu, please see part # 125-8009. Please confirm with a Sciencetech representative if you are uncertain if your system requires this mount for your CCD.
    $ 2,500.00 2500.0 USD
    Price Valid only in North America
    Copyright © Sciencetech