Standard USD Pricelist
Sign in
x
Toggle navigation
Home
Products
Light Sources
Xe Arc Lamp Light Source
Low Power Xe 75W - 150W
Medium Power Xe 300W
High Power Xe 500W - 1600W
Ultra High Power Xe 3000W - 7000W
Deuterium Light Sources
QTH Light Sources
Tunable Light Sources
Calibration Light Sources
Infrared Light Sources
Solar Simulators
Steady State Solar Simulator
Ultra High Efficiency Solar Simulators
Fully Reflective Solar Simulators
Low Cost Solar Simulators
Highly Collimated Solar Simulators
Large Area Solar Simulators
UV Solar Simulators
Fiberized Solar Simulators
High Flux & Concentrator Solar Simulators
Flash Solar Simulators
Large Area Flash Solar Simulators
Highly Collimated Flash Solar Simulators
Concentrator Flash Solar Simulators
Solar Cell IV Testing Equipment
Solar Cell IV Testing Equipment for Steady State Solar Simulators
Solar Cell IV Testing Equipment for Flash Solar Simulators
Quantum Efficiency
Modular Spectrometers
FTIR Spectrometers
Monochromators and Spectrographs
Small Series
Standard Series
High Resolution Series
Integrated and Modular Systems
Spectroradiometer For Detector Characterization
Spectrophotometry
Fluorescence Spectroscopy
Raman Spectroscopy
LIBS Spectrometer
Far Infrared Systems (THz)
Far Infrared Spectrometers
Electrochemical Workstations
Potentiostats
Addons Cards
External Potentiostats
Probes
Multiplexers
Extension and Cell Kits
Photoelectrochemistry & Photovoltaic
Electronic Loads
Upgrades
Accessories / Parts
Cell Chucks
Data Acquisition Equipment
Other Accessories
Sample Chambers
Software
Power Supply
Calibration Cells and Power Meters
Detectors
Single Channel Detector
Line and Area Detectors
Lamps
Xenon Short Arc Lamps
Mercury Xenon Short Arc Lamp
Mercury Short Arc Lamps
QTH Lamps
Infrared Lamps
Optical Components
Bandpass Filters
Filters
Gratings
Filters for Solar Simulation
Reflectors
Optical Coupling Assemblies
Optomechanical
Integrating Spheres
Slit Assemblies
Beam Turning Units
Filter Holders
Filter Wheels
Shutter Assemblies
Optical Choppers
Adapters and Connectors
True
Custom Solutions
Custom Solutions Overview
Success Stories
Custom Capabilities
Applications
Photovoltaic Testing Equipment
Space Environment Simulation
Solar Simulators for Materials Testing
Solar Thermal Applications
About Us
Contact us
Sales Contact
Representatives
Support Contact
Knowledge Centre
Solar Simulator
IV Measurement
Quantum Efficiency
Optomechanical
Integrating Spheres
Slit Assemblies
Beam Turning Units
Filter Holders
Filter Wheels
Shutter Assemblies
Optical Choppers
Adapters and Connectors
View As
2
4
Prev
1
2
3
Next
Filter
View Filter
show
16
20
Sort by
Price
Price
Name
X
Product Category
View Filter
All Products
Light Sources
Xe Arc Lamp Light Source
Low Power Xe 75W - 150W
Medium Power Xe 300W
High Power Xe 500W - 1600W
Ultra High Power Xe 3000W - 7000W
Deuterium Light Sources
QTH Light Sources
Tunable Light Sources
Calibration Light Sources
Infrared Light Sources
Solar Simulators
Steady State Solar Simulator
Ultra High Efficiency Solar Simulators
Fully Reflective Solar Simulators
Low Cost Solar Simulators
Highly Collimated Solar Simulators
Large Area Solar Simulators
UV Solar Simulators
Fiberized Solar Simulators
High Flux & Concentrator Solar Simulators
Flash Solar Simulators
Large Area Flash Solar Simulators
Highly Collimated Flash Solar Simulators
Concentrator Flash Solar Simulators
Solar Cell IV Testing Equipment
Solar Cell IV Testing Equipment for Steady State Solar Simulators
Solar Cell IV Testing Equipment for Flash Solar Simulators
Quantum Efficiency
Modular Spectrometers
FTIR Spectrometers
Monochromators and Spectrographs
Small Series
Standard Series
High Resolution Series
Integrated and Modular Systems
Spectroradiometer For Detector Characterization
Spectrophotometry
Fluorescence Spectroscopy
Raman Spectroscopy
LIBS Spectrometer
Far Infrared Systems (THz)
Far Infrared Spectrometers
Electrochemical Workstations
Potentiostats
Addons Cards
External Potentiostats
Probes
Multiplexers
Extension and Cell Kits
Photoelectrochemistry & Photovoltaic
Electronic Loads
Upgrades
Accessories / Parts
Cell Chucks
Data Acquisition Equipment
Other Accessories
Sample Chambers
Software
Power Supply
Calibration Cells and Power Meters
Detectors
Single Channel Detector
Line and Area Detectors
Lamps
Xenon Short Arc Lamps
Mercury Xenon Short Arc Lamp
Mercury Short Arc Lamps
QTH Lamps
Infrared Lamps
Optical Components
Bandpass Filters
Filters
Gratings
Filters for Solar Simulation
Reflectors
Optical Coupling Assemblies
Optomechanical
Integrating Spheres
Slit Assemblies
Beam Turning Units
Filter Holders
Filter Wheels
Shutter Assemblies
Optical Choppers
Adapters and Connectors
Filter By
Brands
(Clear all)
Bole Solutions / Bohui Prototypes Ltd.
Brady Canada
Huizhou LinTai Industrial Co.,LTD
Identifab Industries Ltd.
Lee Spring
ProjecTech Inc.
Sound Town
StayOnline
Tapmatic
Tyson Tool
X2 Robotics
Zahner-elektrik GmbH & Co.KG
Price Filter
$
-
$
x
Clear all
x
Filter Option
(CTBT-SS) Beam Turner for SS0.5K, SS1.0K, SS1.6K
A Beam Turning Assembly can be mounted to the output port of many of Sciencetech's Solar Simulators to redirect the light downwards onto a sample platform. The Beam Turner may also be used to adjust the light path to any 90° angle perpendicular to the horizontal output beam.
$
1,200.00
In stock
A Beam Turning Assembly can be mounted to the output port of many of Sciencetech's Solar Simulators to redirect the light downwards onto a sample platform. The Beam Turner may also be used to adjust the light path to any 90° angle perpendicular to the horizontal output beam.
$
1,200.00
1200.0
USD
Price Valid only in North America
(FB1T) Low Profile Tilting Filter Box
Sciencetech's FB1T filter box holds one filter per filter box and can accommodate up to 3" x 3" filters. The FB1T filter box is used to stop back reflections from travelling along the path of the incident light. The FB1T filter boxes are stackable, so multiple FB1T filter boxes can be attached if using more than one filter at once is required.
The FB1T has standard mounting for slip rings that are compatible with 2" diameter lens tubes. For mounting with 1" diameter lens tubes Sciencetech's S4-1D (100-8038) coupling adapator is required.
No filter holders are included and filter holders are dependent on the size of the filters to be used.
Compatible filter holders are the FT-series (e.g. FT-75).
$
410.00
Sciencetech's FB1T filter box holds one filter per filter box and can accommodate up to 3" x 3" filters. The FB1T filter box is used to stop back reflections from travelling along the path of the incident light. The FB1T filter boxes are stackable, so multiple FB1T filter boxes can be attached if using more than one filter at once is required.
The FB1T has standard mounting for slip rings that are compatible with 2" diameter lens tubes. For mounting with 1" diameter lens tubes Sciencetech's S4-1D (100-8038) coupling adapator is required.
No filter holders are included and filter holders are dependent on the size of the filters to be used.
Compatible filter holders are the FT-series (e.g. FT-75).
$
410.00
410.0
USD
Price Valid only in North America
(FBC-1) Fiber Bundle Coupler, Non-SMA Connector, 1"
This Fiber Bundle Coupler mates a Sciencetech Beam Condensing Assembly or Light Source Optical Coupling Unit to the input end of a fiber bundle such that the light collected is focused into the fiber bundle with great efficiency. The Fiber Bundle Coupler screws onto the output end of the Beam Condensing Assembly or Light Source Coupling Unit. Once screwed on, the input tip of the fiber bundle would be positioned at the output focal spot for optimum light collection.
$
430.00
In stock
This Fiber Bundle Coupler mates a Sciencetech Beam Condensing Assembly or Light Source Optical Coupling Unit to the input end of a fiber bundle such that the light collected is focused into the fiber bundle with great efficiency. The Fiber Bundle Coupler screws onto the output end of the Beam Condensing Assembly or Light Source Coupling Unit. Once screwed on, the input tip of the fiber bundle would be positioned at the output focal spot for optimum light collection.
$
430.00
430.0
USD
Price Valid only in North America
(FBC-2) Fiber Bundle Coupler, Non-SMA Connector, 2"
This Fiber Bundle Coupler mates a Sciencetech Beam Condensing Assembly or Light Source Optical Coupling Unit to the input end of a fiber bundle such that the light collected is focused into the fiber bundle with great efficiency. The Fiber Bundle Coupler screws onto the output end of the Beam Condensing Assembly or Light Source Coupling Unit. Once screwed on, the input tip of the fiber bundle would be positioned at the output focal spot for optimum light collection.
$
430.00
In stock
This Fiber Bundle Coupler mates a Sciencetech Beam Condensing Assembly or Light Source Optical Coupling Unit to the input end of a fiber bundle such that the light collected is focused into the fiber bundle with great efficiency. The Fiber Bundle Coupler screws onto the output end of the Beam Condensing Assembly or Light Source Coupling Unit. Once screwed on, the input tip of the fiber bundle would be positioned at the output focal spot for optimum light collection.
$
430.00
430.0
USD
Price Valid only in North America
(FBC-SMA-1) SMA Fiber Coupler - 1" Flange
This SMA Fiber Coupler mates a Sciencetech Beam Condensing Assembly to the input end of an SMA fiber such that the light collected is focused into the SMA fiber tip with great efficiency. The SMA Fiber Coupler screws onto the output end of the Beam Condensing Assembly. Once screwed on, the input tip of the fiber bundle is positioned at the output focal spot for optimum light collection. There are two flange sizes of the Fiber Bundle Coupler available to match the 1 and 2 inch diameter sizes of the Beam Condensing Assembly. Please note that the SMA Fiber Coupler should not be used on its own without the beam condensing assembly as otherwise the light collection efficiency from the light source will be very low.
$
228.00
In stock
This SMA Fiber Coupler mates a Sciencetech Beam Condensing Assembly to the input end of an SMA fiber such that the light collected is focused into the SMA fiber tip with great efficiency. The SMA Fiber Coupler screws onto the output end of the Beam Condensing Assembly. Once screwed on, the input tip of the fiber bundle is positioned at the output focal spot for optimum light collection. There are two flange sizes of the Fiber Bundle Coupler available to match the 1 and 2 inch diameter sizes of the Beam Condensing Assembly. Please note that the SMA Fiber Coupler should not be used on its own without the beam condensing assembly as otherwise the light collection efficiency from the light source will be very low.
$
228.00
228.0
USD
Price Valid only in North America
(FBC-SMA-2) SMA Fiber Coupler - 2" Flange
This SMA Fiber Coupler mates a Sciencetech 2" Beam Condensing Assembly (such as IO2 model condensors) to the input end of an SMA fiber such that the light collected is focused into the SMA fiber tip with great efficiency. The SMA Fiber Coupler screws onto the output end of the 2" Beam Condensing Assembly. Once screwed on, the input tip of the fiber bundle is positioned at the output focal spot for optimum light collection. This assembly also includes an X-Y optical coupler that can be used to couple beam line components and allows for independent adjustment of +-3mm along each of two orthogonal axis. There are two flange sizes of the Fiber Bundle Coupler available to match the 1 and 2 inch diameter sizes of the Beam Condensing Assembly. Please note that the SMA Fiber Coupler should not be used on its own without the beam condensing assembly as otherwise the light collection efficiency from the light source is very low.
$
437.00
In stock
This SMA Fiber Coupler mates a Sciencetech 2" Beam Condensing Assembly (such as IO2 model condensors) to the input end of an SMA fiber such that the light collected is focused into the SMA fiber tip with great efficiency. The SMA Fiber Coupler screws onto the output end of the 2" Beam Condensing Assembly. Once screwed on, the input tip of the fiber bundle is positioned at the output focal spot for optimum light collection. This assembly also includes an X-Y optical coupler that can be used to couple beam line components and allows for independent adjustment of +-3mm along each of two orthogonal axis. There are two flange sizes of the Fiber Bundle Coupler available to match the 1 and 2 inch diameter sizes of the Beam Condensing Assembly. Please note that the SMA Fiber Coupler should not be used on its own without the beam condensing assembly as otherwise the light collection efficiency from the light source is very low.
$
437.00
437.0
USD
Price Valid only in North America
(FH-SS-ADD) Additional 2 positions for FH-SS filter holder
This option adds an additional 2 filter positions to the FH-SS filter holder. The FH-SS and FH-SS-ADD option are designed to be used with Sciencetech FT-75-3 type blank filter holders as well as filters that include the -FT option. The FH-SS filter holder is used with Sciencetech's line of Fully Reflective solar simulators as well as the Solar Lightline and SciSun solar simulators.
$
350.00
This option adds an additional 2 filter positions to the FH-SS filter holder. The FH-SS and FH-SS-ADD option are designed to be used with Sciencetech FT-75-3 type blank filter holders as well as filters that include the -FT option. The FH-SS filter holder is used with Sciencetech's line of Fully Reflective solar simulators as well as the Solar Lightline and SciSun solar simulators.
$
350.00
350.0
USD
Price Valid only in North America
(FIB1-9055) Monochromator SMA Adapter
This is an SMA fiber coupler (FC style also available) with an interface flange mount to the input port of a Sciencetech monochromator or spectrograph (fiber not included). Please note two versions are available. One version is for the Sciencetech 9030 monochromator which utilizes its own slit interface flange design. The other version is for all other Sciencetech Series 9000 and 8000 monochromators and spectrographs which use a common slit interface flange design. With an FIB1 at the input port, a slit (fixed or adjustable) is not necessary as the width of the input fiber typically defines the input slit width. Please note that this fiber connection does not address the f number matching issue between the fiber and the monochromator or spectrograph. Hence if it is used at the input port of the monochromator or spectrograph, significant light loss can be expected with the fiber having an f number closer to 1. If this is an issue, please speak to a Sciencetech Applications Specialist about using a condensing lens assembly with the FIB4 or FIB5 instead.
$
230.00
In stock
This is an SMA fiber coupler (FC style also available) with an interface flange mount to the input port of a Sciencetech monochromator or spectrograph (fiber not included). Please note two versions are available. One version is for the Sciencetech 9030 monochromator which utilizes its own slit interface flange design. The other version is for all other Sciencetech Series 9000 and 8000 monochromators and spectrographs which use a common slit interface flange design. With an FIB1 at the input port, a slit (fixed or adjustable) is not necessary as the width of the input fiber typically defines the input slit width. Please note that this fiber connection does not address the f number matching issue between the fiber and the monochromator or spectrograph. Hence if it is used at the input port of the monochromator or spectrograph, significant light loss can be expected with the fiber having an f number closer to 1. If this is an issue, please speak to a Sciencetech Applications Specialist about using a condensing lens assembly with the FIB4 or FIB5 instead.
$
230.00
230.0
USD
Price Valid only in North America
Fiber Optic (FIB1) SMA Adapter to 9030 Monochromator
This is an SMA fiber coupler (FC style also available) with an interface flange mount to the input port of a Sciencetech monochromator or spectrograph (fiber not included). Please note two versions are available. One version is for the Sciencetech 9030 monochromator which utilizes its own slit interface flange design. The other version is for all other Sciencetech Series 9000 and 8000 monochromators and spectrographs which use a common slit interface flange design. With an FIB1 at the input port, a slit (fixed or adjustable) is not necessary as the width of the input fiber typically defines the input slit width. Please note that this fiber connection does not address the f number matching issue between the fiber and the monochromator or spectrograph. Hence if it is used at the input port of the monochromator or spectrograph, significant light loss can be expected with the fiber having an f number closer to 1. If this is an issue, please speak to a Sciencetech Applications Specialist about using a condensing lens assembly with the FIB4 or FIB5 instead
$
220.00
In stock
This is an SMA fiber coupler (FC style also available) with an interface flange mount to the input port of a Sciencetech monochromator or spectrograph (fiber not included). Please note two versions are available. One version is for the Sciencetech 9030 monochromator which utilizes its own slit interface flange design. The other version is for all other Sciencetech Series 9000 and 8000 monochromators and spectrographs which use a common slit interface flange design. With an FIB1 at the input port, a slit (fixed or adjustable) is not necessary as the width of the input fiber typically defines the input slit width. Please note that this fiber connection does not address the f number matching issue between the fiber and the monochromator or spectrograph. Hence if it is used at the input port of the monochromator or spectrograph, significant light loss can be expected with the fiber having an f number closer to 1. If this is an issue, please speak to a Sciencetech Applications Specialist about using a condensing lens assembly with the FIB4 or FIB5 instead
$
220.00
220.0
USD
Price Valid only in North America
(FT-75-3) 3" Filter Holder for SS-FH Filter Holder - accepts up to 3mm thick filters
A filter holder designed to hold any of Sciencetech's Air Mass Filters with a 3" diameter output. This filter holder also holds any 75x75mm filter. It is nominally used with filters that are 3mm thick, however less thick filter may also be used with this filter holder design
$
232.00
In stock
A filter holder designed to hold any of Sciencetech's Air Mass Filters with a 3" diameter output. This filter holder also holds any 75x75mm filter. It is nominally used with filters that are 3mm thick, however less thick filter may also be used with this filter holder design
$
232.00
232.0
USD
Price Valid only in North America
(FT-75-35) 3" Filter Holder for SS-FH Filter Holder - accepts up to 3.5mm thick filters
A filter holder designed to hold filters in Sciencetechs SS-FH filter holder. The SS-FH filter holder is used in Sciencetech's line of fully reflective solar simulators. The FT-75-35 filter holder accepts filters up to 3.5mm thick.
$
232.00
In stock
A filter holder designed to hold filters in Sciencetechs SS-FH filter holder. The SS-FH filter holder is used in Sciencetech's line of fully reflective solar simulators. The FT-75-35 filter holder accepts filters up to 3.5mm thick.
$
232.00
232.0
USD
Price Valid only in North America
(FWG-4-2-Vac) 4 Position 2"Filter Wheel, Vacuum Grade
This four slot filter-wheel was originally designed for the US military to work in a 10^(-7) Torr vacuum environment. Today, a standard non-vacuum version and the original vacuum version are available. The vacuum version can be manufactured in a Class 10,000 clean room, fully baked out, and meets Class A cleanliness standards, at a small additional cost. Please note that the optional external control electronics is not designed to operate in a vacuum. It must operate in ambient pressure environment.
$
5,127.00
In stock
This four slot filter-wheel was originally designed for the US military to work in a 10^(-7) Torr vacuum environment. Today, a standard non-vacuum version and the original vacuum version are available. The vacuum version can be manufactured in a Class 10,000 clean room, fully baked out, and meets Class A cleanliness standards, at a small additional cost. Please note that the optional external control electronics is not designed to operate in a vacuum. It must operate in ambient pressure environment.
$
5,127.00
5127.0
USD
Price Valid only in North America
(FWG-6-1-Manual) 6 Position Manual Filter Wheel
For those concerned with price, a manual filter wheel can be an affordable way to allow the flexibility of a filter wheel at a lower cost than fully motorized options. This filter wheel has space for 6 filters of 1" size (either 1x1" squares or 1" diameter), up to 5mm thick. It is a compact pancake design with an easy to use manual control for switching the position of the filters.
$
1,550.00
In stock
For those concerned with price, a manual filter wheel can be an affordable way to allow the flexibility of a filter wheel at a lower cost than fully motorized options. This filter wheel has space for 6 filters of 1" size (either 1x1" squares or 1" diameter), up to 5mm thick. It is a compact pancake design with an easy to use manual control for switching the position of the filters.
$
1,550.00
1550.0
USD
Price Valid only in North America
(FWG-8-1) 8 Position Motorized Filter Wheel
Sciencetech's FWG-8 motorized filter wheel has eight filter positions. Each filter position accepts 1” diameter round filters up to 5mm thick. The filter wheel is a compact pancake design with an exposed stepper motor mounted on one side.
$
1,852.00
In stock
Sciencetech's FWG-8 motorized filter wheel has eight filter positions. Each filter position accepts 1” diameter round filters up to 5mm thick. The filter wheel is a compact pancake design with an exposed stepper motor mounted on one side.
$
1,852.00
1852.0
USD
Price Valid only in North America
High Speed Internal Shutter for Spectrographs
Sciencetech's 120-9045 high speed shutter is a recommended accessory with Sciencetech's area scan CCD detectors, but can also be used with Sciencetech's LDA photodiodes or InGaAs linear array detectors. This shutter mounts inside a Sciencetech spectrograph behind the input port. Due to its sturdy steel construction, it can withstand approximately 5W/mm^2 (up to about 200 degrees Celsius). This product includes both the shutter and the controller, and can be either manually controlled (via externally mounted button) or computer controlled.
$
2,200.00
In stock
Sciencetech's 120-9045 high speed shutter is a recommended accessory with Sciencetech's area scan CCD detectors, but can also be used with Sciencetech's LDA photodiodes or InGaAs linear array detectors. This shutter mounts inside a Sciencetech spectrograph behind the input port. Due to its sturdy steel construction, it can withstand approximately 5W/mm^2 (up to about 200 degrees Celsius). This product includes both the shutter and the controller, and can be either manually controlled (via externally mounted button) or computer controlled.
$
2,200.00
2200.0
USD
Price Valid only in North America
Input Extension Coupling Tube
This coupling tube connects the Model 200-1K arc lamp housing to the Model FH-AC air-cooled dual filter holder box. Its length is designed specifically to place the air-cooled filter holder with 2" diameter filters in the converging beam of the light source. A mating flange connects this input extension coupling tube with the Model 200-1K arc lamp housing.
$
576.00
In stock
This coupling tube connects the Model 200-1K arc lamp housing to the Model FH-AC air-cooled dual filter holder box. Its length is designed specifically to place the air-cooled filter holder with 2" diameter filters in the converging beam of the light source. A mating flange connects this input extension coupling tube with the Model 200-1K arc lamp housing.
$
576.00
576.0
USD
Price Valid only in North America
(Mono2Fiber) Mono to Fiber Connector
Couples a 1/4" Fiber bundle to the output port of a standard series monochromator. The coupler mounts to a standard series slit assembly such as an SS-80 or SS-82 slit.
The fiber is positioned close to the slit output to couple as much light as possible into the slit.
There is no optical coupling between the fiber and slit.
Please note that this is for the coupling for the fiber only; the slit must be included separately.
$
2,120.00
In stock
Couples a 1/4" Fiber bundle to the output port of a standard series monochromator. The coupler mounts to a standard series slit assembly such as an SS-80 or SS-82 slit.
The fiber is positioned close to the slit output to couple as much light as possible into the slit.
There is no optical coupling between the fiber and slit.
Please note that this is for the coupling for the fiber only; the slit must be included separately.
$
2,120.00
2120.0
USD
Price Valid only in North America
(MS-2) Manual Shutter for Light Sources with 2" Lens Tubes
This manual shutter mounts to light sources that use 2" (50.8mm) diameter lens tubes. The model MS-2 manual shutter can also be mounted on 2" Beam Turning Units (CTBT-2). This shutter can be used with XLH and LH lamp housings and products based on XLH and LH lamp housings.
$
150.00
In stock
This manual shutter mounts to light sources that use 2" (50.8mm) diameter lens tubes. The model MS-2 manual shutter can also be mounted on 2" Beam Turning Units (CTBT-2). This shutter can be used with XLH and LH lamp housings and products based on XLH and LH lamp housings.
$
150.00
150.0
USD
Price Valid only in North America
Sciencetech Vacuum Grade C230X Polarizing Chopper
The Sciencetech Polarizing variable frequency optical chopper is used with the detectors during Martin-Puplett mode. The chopper is positioned in front of the output port, and captures the output at 45 degrees from the two planes of polarization. This facilitates the retrieval of the Fourier Transform Interferogram during M-P mode. The chopper itself is designed for high stability and a broad range of frequency control (from 0.5Hz to 100Hz). The price includes the servo motor and software controller.
$
4,908.00
The Sciencetech Polarizing variable frequency optical chopper is used with the detectors during Martin-Puplett mode. The chopper is positioned in front of the output port, and captures the output at 45 degrees from the two planes of polarization. This facilitates the retrieval of the Fourier Transform Interferogram during M-P mode. The chopper itself is designed for high stability and a broad range of frequency control (from 0.5Hz to 100Hz). The price includes the servo motor and software controller.
$
4,908.00
4908.0
USD
Price Valid only in North America
(SF01-0.1mm) Removable 100μm Fixed Width Slit
This is a single fixed width slit for Sciencetech's 9030 monochromators. It can also be used with any other model monochromator, but requires a SS-F slit holder (120-9046) for each input/output. Multiple slits can be exchanged using a single slit holder.
Please note that the Model 9030 monochromator already includes a pair of removable fixed width slits.
The slit height is 8mm. The slit width is 100μm.
$
250.00
In stock
This is a single fixed width slit for Sciencetech's 9030 monochromators. It can also be used with any other model monochromator, but requires a SS-F slit holder (120-9046) for each input/output. Multiple slits can be exchanged using a single slit holder.
Please note that the Model 9030 monochromator already includes a pair of removable fixed width slits.
The slit height is 8mm. The slit width is 100μm.
$
250.00
250.0
USD
Price Valid only in North America
Prev
1
2
3
Next
Prev
1
2
3
Next
Copyright
©
Sciencetech