This power supply has been specifically designed for the highly stable 75W Hg lamp used inside the new SPS-300 Terahertz FTIR Spectrometer. The '500-75ST' is an adjustable, current regulated, DC Power Supply. It is meant to power up a low pressure, long arc Hg lamp by Heraeus Nobelight Model 75ST. However, it can be used by many other applications which require a steady, low noise current regulated Power Supply of up to 1A, and approximately 100W. It will work with the 500-IG-75ST 800V igniter (150-9016) to ignite the Hereaus 75ST lamp. Please do not use this power supply connected to a UPS stabilizer.


LCD Display (Current, Voltage, Power)
Output Current Control: 0-1A
Dual line voltage: 115 / 230VAC
Input Current: 1A / 0.5A
Input Frequency: 60Hz / 50Hz
Dimensions (L x W x H): 11" x 8" x 5" (28cm x 20cm x 13cm)
Weight: 10 kg (22 lbs)

$ 4,250.00

Replacement igniter for the obsolete 500-IG igniter. The 500-IG igniter was used with Sciencetech 550-200 power supplies.
The 500-AS replacement igniter connects to the 550-200 power supply with the standard 3-pin cable used by the 500-IG igniter. The different ready voltage technology used by this igniter requires a second connection using the standard Sciencetech 4-pin interlock cable (included). The igniter connects to Sciencetech 200F-100 and 201C-100 type lamphouses using the same banana jacks and a second 4-pin interlock cable.

$ 925.00

This power supply is designed for use with Sciencetech's line of IR sources (including, but not limited to, the Globar, and several of our infrared emitter coils). If you are uncertain if this is the correct power supply for your system, please speak with your authorized Sciencetech technical sales staff member.

$ 940.00

The 500-IG-75ST model igniter is used to ignite the ST-75 Hg arc lamp. The igniter produces a conditioned 800V ignition pulse to the lamp. This igniter should be used in conjunction with the 75W Fixed power supply (150-9041) and the ST75 light source (100-9070)

$ 561.00

Sciencetech's touchscreen 75W xenon arc lamp power supply designed for use with Sciencetech's LH- series lamp housing.
This power supply features a 7W2 connection so that only one cable is required to supply all lamp power and communication to the lamp housing. This power supply also has a shutter connection and RS232 connection for electronic control of a shutter or computer control of the power supply if those optional accessories are purchased.

601 series power supplies accept 110-240VAC input. Includes a USB to serial adapter.
This system includes 1 IEC 60320 C13 compatible power cable. Region-specific version must be selected at the time of placing an order (see product 491-9001).

Features
-single 7W2 connection for lamp power, cooling, and communication to lamp house
-easy-to-use touchscreen interface
-shutter and exposure control (if electronic shutter upgrade is ordered)
-lamp start and time log
-safety interlocks

Optional Upgrades
-RS232 computer control with GUI
-temperature monitor
-remote lamp status monitoring
-auto lamp starting

$ 2,767.00

Sciencetech's touchscreen 100W xenon arc lamp power supply designed for use with Sciencetech's LH- series lamp housing.
This power supply features a 7W2 connection so that only one cable is required to supply all lamp power and communication to the lamp housing. This power supply also has a shutter connection and RS232 connection for electronic control of a shutter or computer control of the power supply if those optional accessories are purchased.

601 series power supplies accept 110-240VAC input.
This system includes 1 IEC 60320 C13 compatible power cable. Region-specific version must be selected at the time of placing an order (see product 491-9001).
Includes a USB to serial adapter.

Features
-single 7W2 connection for lamp power, cooling, and communication to lamp house
-easy-to-use touchscreen interface
-shutter and exposure control (if electronic shutter upgrade is ordered)
-lamp start and time log
-safety interlocks

Optional Upgrades
-RS232 computer control with GUI
-temperature monitor
-remote lamp status monitoring
-auto lamp starting

$ 2,767.00

Sciencetech's touchscreen 150W xenon arc lamp power supply designed for use with Sciencetech's LH- series lamp housing.
This power supply features a 7W2 connection so that only one cable is required to supply all lamp power and communication to the lamp housing. This power supply also has a shutter connection and RS232 connection for electronic control of a shutter or computer control of the power supply if those optional accessories are purchased.

601 series power supplies accept 110-240VAC input.
This system includes 1 IEC 60320 C13 compatible power cable. Region-specific version must be selected at the time of placing an order (see product 491-9001).
Includes a USB to serial adapter.

Features
-single 7W2 connection for lamp power, cooling, and communication to lamp house
-easy-to-use touchscreen interface
-shutter and exposure control (if electronic shutter upgrade is ordered)
-lamp start and time log
-safety interlocks

Optional Upgrades
-RS232 computer control with GUI
-temperature monitor
-remote lamp status monitoring
-auto lamp starting

$ 3,460.00

Sciencetech's touchscreen 300W xenon arc lamp power supply designed for use with Sciencetech's LH- series lamp housing.
This power supply features a 7W2 connection so that only one cable is required to supply all lamp power and communication to the lamp housing. This power supply also has a shutter connection and RS232 connection for electronic control of a shutter or computer control of the power supply if those optional accessories are purchased.

601 series power supplies accept 110-240VAC input.
This system includes 1 IEC 60320 C13 compatible power cable. Region-specific version must be selected at the time of placing an order (see product 491-9001).
Includes a USB to serial adapter.


Features
-single 7W2 connection for lamp power, cooling, and communication to lamp house
-easy-to-use touchscreen interface
-shutter and exposure control (if electronic shutter upgrade is ordered)
-lamp start and time log
-safety interlocks
-RS232 software GUI included, shown below

Optional Upgrades
-temperature monitor
-remote lamp status monitoring
-auto lamp starting

$ 3,460.00

The 601-EXIGN is an external igniter for the 601 series power supply. The 601-EXIGN is designed for integration of the 601 series supply for custom builds where a lamp house cannot be used, or for integration with legacy Sciencetech lamp houses.
The 601-EXIGN connects to the 601 series supply with the standard 601-CABLE. HV wires with sheathed banana plugs are supplied for connecting the 601-EXIGN to the custom interface. The distance from the igniter to the arc lamp is important and should not exceed 20" in order to provide reliable ignition.
The standard 24VDC interlock for Sciencetech lamp houses is defeated inside the igniter.
Sciencetech 601-150 power supplies with a 601-EXIGN attached are designed to operate with Xenon short arc lamps with voltages of 20VDC and nominal current of 7.5A
Sciencetech 601-300 power supplies with 601-EXIGN attached are designed to operate with Xenon short arc lamps with voltages of 20VDC and nominal current of 15A
Unless purchased with a Sciencetech lamp solution customers are responsible for cooling the Xenon short arc lamp and providing the required safety interlock for operation of the light source.

WARNING! HV is very dangerous. The 601-EXIGN is capable of delivering a 21kV pulse.

$ 1,170.00

Sciencetech's new 611 series power supplies are designed to work with Sciencetech XLH series lamp houses. Includes a USB to serial adapter.
The 611-1.6k is designed to power 1600W Xenon and Hg-Xenon arc lamps. The 611-6k power supply is CE compliant.
The 611 power supply includes a touchscreen interface and several useful built in components:
- Lamp life timer
- Powers and controls Sciencetech XLH lamp house fans
- Shutter and exposure controller
- RS232 Computer Control
- Safety interlock (optional upgrade)
- Temperature monitor (optional upgrade)
- Monitor Output (optional upgrade)
- Auto Lamp Start (optional upgrade)

Please see the technical datasheet for more information.

Power Requirements
200-240 VAC input, 12.1-9.0A, 50/60Hz, Fused 15A
Includes 1 IEC 60320 C19 compatible power cable, select compatible cable for your region.

$ 5,200.00

An adjustable power supply for Sciencetech's line of 1.6kW Mercury (Hg) Lamps. Includes a USB to serial adapter.

Power Requirements
200-240 VAC input, 12.1-9.0A, 50/60Hz, Fused 15A
Includes 1 IEC 60320 C19 compatible power cable, select compatible cable for your region.

$ 6,804.00

Sciencetech's new 611 series power supplies are designed to work with Sciencetech XLH series lamp houses. Includes a USB to serial adapter.
The 611-1k is designed to power 1000W Xenon and Hg-Xenon arc lamps. The 611-1k power supply is CE compliant.
The 611 power supply includes a touchscreen interface and several useful built in components:
- Lamp life timer
- Powers and controls Sciencetech XLH lamp house fans
- Shutter and exposure controller
- RS232 Computer Control
- Safety interlock (optional upgrade)
- Temperature monitor (optional upgrade)
- Monitor Output (optional upgrade)
- Auto Lamp Start (optional upgrade)

Power Requirements
200-240 VAC input, 7.5-6.3A, 50/60Hz, Fused 15A
Includes 1 IEC 60320 C19 compatible power cable, select compatible cable for your region.


Please see the technical datasheet for more information.

$ 4,875.00

An adjustable power supply for Sciencetech's line of 1kW Mercury (Hg) Lamps. Includes a USB to serial adapter.

Power Requirements
200-240 VAC input, 12.1-9.0A, 50/60Hz, Fused 15A
Includes 1 IEC 60320 C19 compatible power cable, select compatible cable for your region.

$ 6,804.00

Sciencetech's new 611 series power supplies are designed to work with Sciencetech XLH series lamp houses. Includes a USB to serial adapter.
The 611-500 is designed to power 500W Xenon and Hg-Xenon arc lamps. The 611-500 Power Supply is CE compliant.
The 611 power supply includes a touchscreen interface and several useful built in components:
- Lamp life timer
- Powers and controls Sciencetech XLH lamp house fans
- Shutter and exposure controller
- RS232 Computer Control
- Safety interlock (optional upgrade)
- Temperature monitor (optional upgrade)
- Monitor Output (optional upgrade)
- Auto Lamp Start (optional upgrade)

Power Requirements
100-240 VAC input, 9.1-3.8A, 50/60Hz
This system includes 1 IEC 60320 C13 compatible power cable. Region-specific version must be selected at the time of placing an order (see product 491-9001).


Includes a USB to serial adapter.

$ 6,805.00

This is an adjustable power supply for Sciencetech's line of 500W Mercury (Hg) Lamps. Includes a USB to serial adapter.

$ 3,959.00

The 611-EXIGN is an external igniter for the 611 series power supply. The 611-EXIGN is designed for integtration of the 611 series supply with custom or third party Xenon short arc lamp houses. The 611-EXIGN connects to the 611 series supply with the standard 611-CABLE. non-terminated HV wires are supplied for connecting the 611-EXIGN to the third party lamp house.
WARNING! HV is very dangerous. The 611-EXIGN is capable of delivering a >30kV pulse.

$ 900.00

Sciencetech's 621 series power supplies are designed to work with Sciencetech HPLH series lamp houses. The 621-3k is designed to power 2.5kW and 3.0kW xenon and mercury-xenon arc lamps. The 621 power supply includes a touchscreen interface and several useful built in components:
- Lamp life timer
- Powers and controls Sciencetech XLH lamp house fans
- Shutter and exposure controller (24VDC with 12VDC hold)
- RS232 Computer Control (USB to serial adapter included)
- Temperature monitor (optional upgrade)
- Monitor Output (optional upgrade)
- Auto Lamp Start (optional upgrade)
- Safety interlock (optional upgrade)

This product cannot be CE marked

Requires 1 NEMA 6-30P power cable
200-240VAC, 20A

Please see the technical datasheet for more information.

$ 10,321.00

This mount will attach cryogenic detectors directly to a Sciencetech monochromator or spectrometer. Please note that this mount is designed specifically for cryogenically cooled detectors, and may not function for other types of detectors. If you are uncertain about whether you need this mount or not, please contact your Sciencetech Representative.

$ 525.00

This is a quick release mount for many of Sciencetech's standard single element detectors or PMTs. It allows the user to easily replace one detector with another, and remain confident in the ability of the system to hold and align various detectors properly with minimal effort. This will not work with either LDA or CCD systems or Cryogenic detectors. Please speak to your Technical Sales member at Sciencetech for more information.

$ 200.00

A standard single-element detector mount for Sciencetech's line of monochromators and/or spectrometers. This quick release mount comes complete with Sciencetech's quick release mount (125-8012) as well as a quick release flange which mounts to a detector or component. The quick release flange has an internal 1.035-40 thread which can be used to mount Sciencetech's 525-5 line of detectors as well as other common optical components such as Thorlabs 1" lens tubes.

Please note that this mount will not work with dewer style detectors. If you are uncertain about what type of detector mount your system needs, please contact your Sciencetech representative.

$ 181.00