Shop | Sciencetech Inc.
Standard USD Pricelist

  • x

    Probes

    We offers special probes, which are used for dedicated experiments and aid in getting low-artefact measurements for different extreme systems, hence if the system under investigation shows very high impedance, very low impedances or very low capacitance. Special probes are also available to extend the operation range of the ZENNIUM series potentiostats like CVB120, FRA-Probe or Noise Probe.

    2 4
    Filter View Filter
    Sort by
    X

    Product Category

    View Filter
    • Filter By
      Brands
      (Clear all)
      • Price Filter
      $ - $
    x
    Clear all x

    Filter Option

    The FRA-Probe interfaces a third-party potentiostat or an electronic load to a ZENNIUM series potentiostat. The probe allows ZENNIUM potentiostats to modulate the current or voltage signal of third party potentiostats and carry out EIS measurements. The FRA-Probe allows ZENNIUM users to expand the power range to unlimited scales enabling EIS measurements on extreme samples like full stack fuel cells.

    The third party potentiostat or the electronic load must provide an analog control input and analog signal outputs for use with the FRA-Probe.

    The FRA-Probe interfaced setup can also be incorporated in a Python lab environment and can be controlled remotely.

    For pricing information, please request a quotation from sales@sciencetech-inc.com.
    The FRA-Probe interfaces a third-party potentiostat or an electronic load to a ZENNIUM series potentiostat. The probe allows ZENNIUM potentiostats to modulate the current or voltage signal of third party potentiostats and carry out EIS measurements. The FRA-Probe allows ZENNIUM users to expand the power range to unlimited scales enabling EIS measurements on extreme samples like full stack fuel cells.

    The third party potentiostat or the electronic load must provide an analog control input and analog signal outputs for use with the FRA-Probe.

    The FRA-Probe interfaced setup can also be incorporated in a Python lab environment and can be controlled remotely.

    For pricing information, please request a quotation from sales@sciencetech-inc.com.
    $ 1,441.00 1441.0 USD
    Price Valid only in North America

    High Impedance Probe

    The HiZ probe set is specially designed for high impedance measurements and raise the input impedance up to 1000 TΩ || 1 pF.

    U- and I-probe come in two small boxes which can easily be placed near by the sample. By this, electrical noise artifacts are minimized. Typical applications are investigations on passive layers, oxydes, nitrides, dielectric films, ceramic substrates, low conductive electrolytes, lacquers, coatings, microelectrodes etc.
    The HiZ Probe set is connected to the Probe I and the Probe E terminals of the IM6 or Zennium. No additional hardware is needed.

    Input impedance: 5 pF//10 T (typ.)

    For pricing information, please request a quotation from sales@sciencetech-inc.com.
    High Impedance Probe

    The HiZ probe set is specially designed for high impedance measurements and raise the input impedance up to 1000 TΩ || 1 pF.

    U- and I-probe come in two small boxes which can easily be placed near by the sample. By this, electrical noise artifacts are minimized. Typical applications are investigations on passive layers, oxydes, nitrides, dielectric films, ceramic substrates, low conductive electrolytes, lacquers, coatings, microelectrodes etc.
    The HiZ Probe set is connected to the Probe I and the Probe E terminals of the IM6 or Zennium. No additional hardware is needed.

    Input impedance: 5 pF//10 T (typ.)

    For pricing information, please request a quotation from sales@sciencetech-inc.com.
    $ 1,651.00 1651.0 USD
    Price Valid only in North America

    The Noise Probe is a low power potentiostat for the ZENNIUM-series potentiostats and is specially designed for all common electrochemical noise techniques. In addition Zahner developed CorrElNoise®. This revolutionary new method is superior to common ECN techniques as it measures the current and voltage noise in (quasi-)parallel condition by fast switching between the open circuit potential and short circuit conditions.

    The Noise Probe can carry out different kind of measurements which are listed below.

    -Open circuit potential noise (OCPN)
    -Potentiostatic controlled current noise (PCCN)
    -Galvanostatic controlled potential noise (GCPN)
    -Uncorrelated current & potential noise (UCPN)
    -Correlated electrochemical noise (CorrElNoise®)

    For pricing information, please request a quotation from sales@sciencetech-inc.com.
    The Noise Probe is a low power potentiostat for the ZENNIUM-series potentiostats and is specially designed for all common electrochemical noise techniques. In addition Zahner developed CorrElNoise®. This revolutionary new method is superior to common ECN techniques as it measures the current and voltage noise in (quasi-)parallel condition by fast switching between the open circuit potential and short circuit conditions.

    The Noise Probe can carry out different kind of measurements which are listed below.

    -Open circuit potential noise (OCPN)
    -Potentiostatic controlled current noise (PCCN)
    -Galvanostatic controlled potential noise (GCPN)
    -Uncorrelated current & potential noise (UCPN)
    -Correlated electrochemical noise (CorrElNoise®)

    For pricing information, please request a quotation from sales@sciencetech-inc.com.
    $ 2,850.00 2850.0 USD
    Price Valid only in North America
    Copyright © Sciencetech