Standard USD Pricelist
Sign in
x
Toggle navigation
Home
Products
Light Sources
Xe Arc Lamp Light Source
Low Power Xe 75W - 150W
Medium Power Xe 300W
High Power Xe 500W - 1600W
Ultra High Power Xe 3000W - 7000W
Deuterium Light Sources
QTH Light Sources
Tunable Light Sources
Calibration Light Sources
Infrared Light Sources
Solar Simulators
Steady State Solar Simulator
Ultra High Efficiency Solar Simulators
Fully Reflective Solar Simulators
Low Cost Solar Simulators
Highly Collimated Solar Simulators
Large Area Solar Simulators
UV Solar Simulators
Fiberized Solar Simulators
High Flux & Concentrator Solar Simulators
Flash Solar Simulators
Large Area Flash Solar Simulators
Highly Collimated Flash Solar Simulators
Concentrator Flash Solar Simulators
Solar Cell IV Testing Equipment
Solar Cell IV Testing Equipment for Steady State Solar Simulators
Solar Cell IV Testing Equipment for Flash Solar Simulators
Quantum Efficiency
Modular Spectrometers
FTIR Spectrometers
Monochromators and Spectrographs
Small Series
Standard Series
High Resolution Series
Integrated and Modular Systems
Spectroradiometer For Detector Characterization
Spectrophotometry
Fluorescence Spectroscopy
Raman Spectroscopy
LIBS Spectrometer
Far Infrared Systems (THz)
Far Infrared Spectrometers
Electrochemical Workstations
Potentiostats
Addons Cards
External Potentiostats
Probes
Multiplexers
Extension and Cell Kits
Photoelectrochemistry & Photovoltaic
Electronic Loads
Upgrades
Accessories / Parts
Cell Chucks
Data Acquisition Equipment
Other Accessories
Sample Chambers
Software
Power Supply
Calibration Cells and Power Meters
Detectors
Single Channel Detector
Line and Area Detectors
Lamps
Xenon Short Arc Lamps
Mercury Xenon Short Arc Lamp
Mercury Short Arc Lamps
QTH Lamps
Infrared Lamps
Optical Components
Bandpass Filters
Filters
Gratings
Filters for Solar Simulation
Reflectors
Optical Coupling Assemblies
Optomechanical
Integrating Spheres
Slit Assemblies
Beam Turning Units
Filter Holders
Filter Wheels
Shutter Assemblies
Optical Choppers
Adapters and Connectors
True
Custom Solutions
Custom Solutions Overview
Success Stories
Custom Capabilities
Applications
Photovoltaic Testing Equipment
Space Environment Simulation
Solar Simulators for Materials Testing
Solar Thermal Applications
About Us
Contact us
Sales Contact
Representatives
Support Contact
Knowledge Centre
Solar Simulator
IV Measurement
Quantum Efficiency
Accessories / Parts
Cell Chucks
Data Acquisition Equipment
Other Accessories
Sample Chambers
Software
Power Supply
Calibration Cells and Power Meters
Detectors
Lamps
Optical Components
Optomechanical
View As
2
4
Prev
1
2
3
4
5
6
7
Next
Filter
View Filter
show
16
20
Sort by
Price
Price
Name
X
Product Category
View Filter
All Products
Light Sources
Xe Arc Lamp Light Source
Low Power Xe 75W - 150W
Medium Power Xe 300W
High Power Xe 500W - 1600W
Ultra High Power Xe 3000W - 7000W
Deuterium Light Sources
QTH Light Sources
Tunable Light Sources
Calibration Light Sources
Infrared Light Sources
Solar Simulators
Steady State Solar Simulator
Ultra High Efficiency Solar Simulators
Fully Reflective Solar Simulators
Low Cost Solar Simulators
Highly Collimated Solar Simulators
Large Area Solar Simulators
UV Solar Simulators
Fiberized Solar Simulators
High Flux & Concentrator Solar Simulators
Flash Solar Simulators
Large Area Flash Solar Simulators
Highly Collimated Flash Solar Simulators
Concentrator Flash Solar Simulators
Solar Cell IV Testing Equipment
Solar Cell IV Testing Equipment for Steady State Solar Simulators
Solar Cell IV Testing Equipment for Flash Solar Simulators
Quantum Efficiency
Modular Spectrometers
FTIR Spectrometers
Monochromators and Spectrographs
Small Series
Standard Series
High Resolution Series
Integrated and Modular Systems
Spectroradiometer For Detector Characterization
Spectrophotometry
Fluorescence Spectroscopy
Raman Spectroscopy
LIBS Spectrometer
Far Infrared Systems (THz)
Far Infrared Spectrometers
Electrochemical Workstations
Potentiostats
Addons Cards
External Potentiostats
Probes
Multiplexers
Extension and Cell Kits
Photoelectrochemistry & Photovoltaic
Electronic Loads
Upgrades
Accessories / Parts
Cell Chucks
Data Acquisition Equipment
Other Accessories
Sample Chambers
Software
Power Supply
Calibration Cells and Power Meters
Detectors
Single Channel Detector
Line and Area Detectors
Lamps
Xenon Short Arc Lamps
Mercury Xenon Short Arc Lamp
Mercury Short Arc Lamps
QTH Lamps
Infrared Lamps
Optical Components
Bandpass Filters
Filters
Gratings
Filters for Solar Simulation
Reflectors
Optical Coupling Assemblies
Optomechanical
Integrating Spheres
Slit Assemblies
Beam Turning Units
Filter Holders
Filter Wheels
Shutter Assemblies
Optical Choppers
Adapters and Connectors
Filter By
Brands
(Clear all)
Bole Solutions / Bohui Prototypes Ltd.
Brady Canada
Huizhou LinTai Industrial Co.,LTD
Identifab Industries Ltd.
Lee Spring
ProjecTech Inc.
Sound Town
StayOnline
Tapmatic
Tyson Tool
X2 Robotics
Zahner-elektrik GmbH & Co.KG
Price Filter
$
-
$
x
Clear all
x
Filter Option
(611-1k Hg) 1000W Adjustable Power Supply for Hg Lamps
An adjustable power supply for Sciencetech's line of 1kW Mercury (Hg) Lamps. Includes a USB to serial adapter.
Power Requirements
200-240 VAC input, 12.1-9.0A, 50/60Hz, Fused 15A
Includes 1 IEC 60320 C19 compatible power cable, select compatible cable for your region.
$
6,804.00
In stock
An adjustable power supply for Sciencetech's line of 1kW Mercury (Hg) Lamps. Includes a USB to serial adapter.
Power Requirements
200-240 VAC input, 12.1-9.0A, 50/60Hz, Fused 15A
Includes 1 IEC 60320 C19 compatible power cable, select compatible cable for your region.
$
6,804.00
6804.0
USD
Price Valid only in North America
(500-1K Hg) 1000W Adjustable Power Supply for Hg Lamps
An adjustable power supply for Sciencetech's line of 1kW Mercury (Hg) Lamps.
$
6,804.00
In stock
An adjustable power supply for Sciencetech's line of 1kW Mercury (Hg) Lamps.
$
6,804.00
6804.0
USD
Price Valid only in North America
Thermoelectrically Cooled PMT Housing (PMH-04)
Integral HV power supply and display unit
4 digits LCD display
Analog BNC output
Available AD data acquisition system for capture to computer
Cooling temperature: -20°C. Warm-up time 10 minutes
Note: Cooling temperature is dependent on ambient temperature
Includes a small water recirculator (required for operation)
$
6,697.00
Integral HV power supply and display unit
4 digits LCD display
Analog BNC output
Available AD data acquisition system for capture to computer
Cooling temperature: -20°C. Warm-up time 10 minutes
Note: Cooling temperature is dependent on ambient temperature
Includes a small water recirculator (required for operation)
$
6,697.00
6697.0
USD
Price Valid only in North America
(UJP-350-LR-16) U-Jig package, 350x350mm target, 16bit DAQ
Target size: 350x350mm
DAQ: 16 bit
Detector size : 20x20mm
Detector Type: SCI-REF-LR
Connectivity: 1 x USB2.0
Power Requirements: 120VAC x 4A / 220VAC x 2A
Dimensions: 600x600x125
Includes SciMeasurementStage software
$
6,485.00
In stock
Target size: 350x350mm
DAQ: 16 bit
Detector size : 20x20mm
Detector Type: SCI-REF-LR
Connectivity: 1 x USB2.0
Power Requirements: 120VAC x 4A / 220VAC x 2A
Dimensions: 600x600x125
Includes SciMeasurementStage software
$
6,485.00
6485.0
USD
Price Valid only in North America
(SCIDTGS-PE) Low Noise DTGS TeraHertz Detector
Sciencetech's proprietary wideband detector design comes packaged in our standard "hockey puck" enclosure (2" diameter x 1" high) and is connectorized to be powered directly from the Stanford SR-810/830 type lock-in amplifiers,
The spectral range is limited by high density polyethylene window.
The detector WILL saturate on the visible light from the lamp. After alignment, cover the entire input opening of the detector head with thin black polyethylene to prevent undesired visible light from overloading the detector.
This detector is suitable for direct connection to Stanford SR-830 lockin preamp power. When using the Stanford lock-in, the signal overload indicator will light just before the detector saturates.The SCIDTGS-PE detector is suitable for testing FTIR alignment and material transmission measurements without special cooling.
Upon installation, the optical system MUST be re-aligned to image the iris of the light source onto the detector element. This may require rotating the entire detector head to an optimum position and/or adjusting mirrors and re-focusing.
Element size 2.0 mm dia.
Spectral bandwidth Limited by High Density Polyethylene window
Sensitivity 133,000 volts per watt HDPE Window
Frequency response 8.8Hz - 265Hz (-3db points)
N.E.P. 1x10-10 watts (100Hz, 1Hz BW)
Power requirements: +/- 15 to +/- 24 volts max @ +/- 8 mA max.
Power connections: DB-9M Pins 2,3,4,5,9 no connection
+V In Pin 1
-V In Pin 6
Common Pin 7
Case GND Pin 8
Suitable for direct connection to Stanford SR-830 lockin preamp power (not included).
$
6,200.00
In stock
Sciencetech's proprietary wideband detector design comes packaged in our standard "hockey puck" enclosure (2" diameter x 1" high) and is connectorized to be powered directly from the Stanford SR-810/830 type lock-in amplifiers,
The spectral range is limited by high density polyethylene window.
The detector WILL saturate on the visible light from the lamp. After alignment, cover the entire input opening of the detector head with thin black polyethylene to prevent undesired visible light from overloading the detector.
This detector is suitable for direct connection to Stanford SR-830 lockin preamp power. When using the Stanford lock-in, the signal overload indicator will light just before the detector saturates.The SCIDTGS-PE detector is suitable for testing FTIR alignment and material transmission measurements without special cooling.
Upon installation, the optical system MUST be re-aligned to image the iris of the light source onto the detector element. This may require rotating the entire detector head to an optimum position and/or adjusting mirrors and re-focusing.
Element size 2.0 mm dia.
Spectral bandwidth Limited by High Density Polyethylene window
Sensitivity 133,000 volts per watt HDPE Window
Frequency response 8.8Hz - 265Hz (-3db points)
N.E.P. 1x10-10 watts (100Hz, 1Hz BW)
Power requirements: +/- 15 to +/- 24 volts max @ +/- 8 mA max.
Power connections: DB-9M Pins 2,3,4,5,9 no connection
+V In Pin 1
-V In Pin 6
Common Pin 7
Case GND Pin 8
Suitable for direct connection to Stanford SR-830 lockin preamp power (not included).
$
6,200.00
6200.0
USD
Price Valid only in North America
(TC-2000) Liquid Cooling/Heating Recirculator 250W/2000W Capacity - 115VAC
Sciencetech's TC-2000 is a temperature control unit for use with Sciencetech's -L (liquid cooled) solar cell chucks.
It is capable of heating or cooling a device under test from 5-80°C using distilled water or from -10 to 80°C using a Water/Ethylene Glycol mixture.
Cooling fluid not included.
For more detailed information please contact a Technical Specialist.
$
5,613.00
Sciencetech's TC-2000 is a temperature control unit for use with Sciencetech's -L (liquid cooled) solar cell chucks.
It is capable of heating or cooling a device under test from 5-80°C using distilled water or from -10 to 80°C using a Water/Ethylene Glycol mixture.
Cooling fluid not included.
For more detailed information please contact a Technical Specialist.
$
5,613.00
5613.0
USD
Price Valid only in North America
(TC-2000) Liquid Cooling/Heating Recirculator 250W/2000W Capacity - 230VAC
Sciencetech's TC-2000 is a temperature control unit for use with Sciencetech's -L (liquid cooled) solar cell chucks.
It is capable of heating or cooling a device under test from 5-80°C using distilled water or from -10 to 80°C using a Water/Ethylene Glycol mixture.
Cooling fluid not included.
For more detailed information please contact a Technical Specialist.
$
5,613.00
Sciencetech's TC-2000 is a temperature control unit for use with Sciencetech's -L (liquid cooled) solar cell chucks.
It is capable of heating or cooling a device under test from 5-80°C using distilled water or from -10 to 80°C using a Water/Ethylene Glycol mixture.
Cooling fluid not included.
For more detailed information please contact a Technical Specialist.
$
5,613.00
5613.0
USD
Price Valid only in North America
(SCI-SCC6-TE) 6.5" x 6.5" (16.5 x 16.5cm) Solar Cell Chuck, TE Cooled, Vacuum Ready
The SCI-SCC6-TE cell chuck is an economical way of providing temperature control and electrical connection to your test cells. It has a conductive tin-plated copper base plate (gold plating available) and is compatible with all of Sciencetech's probe systems. The cell chuck is capable of vacuum hold-down (vacuum pump sold separately) and has thermoelectric cooling elements that can heat or cool your test cells from dew point to 60 ºC.
Cooling area: 6" x 6"
Temperature Range: 10 - 60 ºC
Power Input: 115-240VAC
Power Usage: 300W
Options: Vacuum Pump
$
5,600.00
In stock
The SCI-SCC6-TE cell chuck is an economical way of providing temperature control and electrical connection to your test cells. It has a conductive tin-plated copper base plate (gold plating available) and is compatible with all of Sciencetech's probe systems. The cell chuck is capable of vacuum hold-down (vacuum pump sold separately) and has thermoelectric cooling elements that can heat or cool your test cells from dew point to 60 ºC.
Cooling area: 6" x 6"
Temperature Range: 10 - 60 ºC
Power Input: 115-240VAC
Power Usage: 300W
Options: Vacuum Pump
$
5,600.00
5600.0
USD
Price Valid only in North America
LDA-2000 - 1024 Pixel, Visible Range
A Linear array sensitive in the 200 to 1000nm range.
System includes:
Photodiode array LDA 2000-1024 detector
Power supply
All cables and connections required for the system
A/D data acquisition board
Includes free version of SciRunLDA, a basic library for interfacing with other software. We recommend SciLDA, the full software package, for users who want a full feature system.
$
5,571.00
In stock
A Linear array sensitive in the 200 to 1000nm range.
System includes:
Photodiode array LDA 2000-1024 detector
Power supply
All cables and connections required for the system
A/D data acquisition board
Includes free version of SciRunLDA, a basic library for interfacing with other software. We recommend SciLDA, the full software package, for users who want a full feature system.
$
5,571.00
5571.0
USD
Price Valid only in North America
Grating, Holo 102x102x16mm 600l/mm @ 650nm
.
$
5,500.00
In stock
.
$
5,500.00
5500.0
USD
Price Valid only in North America
Grating, Holo 102x102x16mm 1800l/mm @ 450nm
.
$
5,500.00
In stock
.
$
5,500.00
5500.0
USD
Price Valid only in North America
Grating, Holo 102x102x16mm 1150l/mm @ 620nm
.
$
5,500.00
In stock
.
$
5,500.00
5500.0
USD
Price Valid only in North America
Grating, Holo 102x102x16mm 1200l/mm @ 700nm
.
$
5,500.00
In stock
.
$
5,500.00
5500.0
USD
Price Valid only in North America
Grating, Holo 102x102x16mm 1200l/mm @ 250nm
.
$
5,500.00
In stock
.
$
5,500.00
5500.0
USD
Price Valid only in North America
Grating, Holo 102x102x16mm 900l/mm @ 850nm
.
$
5,500.00
In stock
.
$
5,500.00
5500.0
USD
Price Valid only in North America
Grating, Holo 102x102x16mm 2400l/mm @ 250nm
Holographic Grating
2400 lines per mm
Blazed at 250nm
Substrate Size: 110 x 110 x 16mm
Ruled Area: 102 x 102mm
$
5,500.00
In stock
Holographic Grating
2400 lines per mm
Blazed at 250nm
Substrate Size: 110 x 110 x 16mm
Ruled Area: 102 x 102mm
$
5,500.00
5500.0
USD
Price Valid only in North America
LDA-2000 - 512 Pixel, Visible Range
A Linear array sensitive in the 200 to 1000nm range.
System includes:
Photodiode array LDA 2000-512 detector
Power supply
All cables and connections required for the system
A/D data acquisition board and basic software library
$
5,459.00
In stock
A Linear array sensitive in the 200 to 1000nm range.
System includes:
Photodiode array LDA 2000-512 detector
Power supply
All cables and connections required for the system
A/D data acquisition board and basic software library
$
5,459.00
5459.0
USD
Price Valid only in North America
(611-1.6k) Adjustable Touchscreen Power Supply, 1600W Xe
Sciencetech's new 611 series power supplies are designed to work with Sciencetech XLH series lamp houses. Includes a USB to serial adapter.
The 611-1.6k is designed to power 1600W Xenon and Hg-Xenon arc lamps. The 611-6k power supply is CE compliant.
The 611 power supply includes a touchscreen interface and several useful built in components:
- Lamp life timer
- Powers and controls Sciencetech XLH lamp house fans
- Shutter and exposure controller
- RS232 Computer Control
- Safety interlock (optional upgrade)
- Temperature monitor (optional upgrade)
- Monitor Output (optional upgrade)
- Auto Lamp Start (optional upgrade)
Please see the technical datasheet for more information.
Power Requirements
200-240 VAC input, 12.1-9.0A, 50/60Hz, Fused 15A
Includes 1 IEC 60320 C19 compatible power cable, select compatible cable for your region.
$
5,200.00
In stock
Sciencetech's new 611 series power supplies are designed to work with Sciencetech XLH series lamp houses. Includes a USB to serial adapter.
The 611-1.6k is designed to power 1600W Xenon and Hg-Xenon arc lamps. The 611-6k power supply is CE compliant.
The 611 power supply includes a touchscreen interface and several useful built in components:
- Lamp life timer
- Powers and controls Sciencetech XLH lamp house fans
- Shutter and exposure controller
- RS232 Computer Control
- Safety interlock (optional upgrade)
- Temperature monitor (optional upgrade)
- Monitor Output (optional upgrade)
- Auto Lamp Start (optional upgrade)
Please see the technical datasheet for more information.
Power Requirements
200-240 VAC input, 12.1-9.0A, 50/60Hz, Fused 15A
Includes 1 IEC 60320 C19 compatible power cable, select compatible cable for your region.
$
5,200.00
5200.0
USD
Price Valid only in North America
(FWG-4-2-Vac) 4 Position 2"Filter Wheel, Vacuum Grade
This four slot filter-wheel was originally designed for the US military to work in a 10^(-7) Torr vacuum environment. Today, a standard non-vacuum version and the original vacuum version are available. The vacuum version can be manufactured in a Class 10,000 clean room, fully baked out, and meets Class A cleanliness standards, at a small additional cost. Please note that the optional external control electronics is not designed to operate in a vacuum. It must operate in ambient pressure environment.
$
5,127.00
In stock
This four slot filter-wheel was originally designed for the US military to work in a 10^(-7) Torr vacuum environment. Today, a standard non-vacuum version and the original vacuum version are available. The vacuum version can be manufactured in a Class 10,000 clean room, fully baked out, and meets Class A cleanliness standards, at a small additional cost. Please note that the optional external control electronics is not designed to operate in a vacuum. It must operate in ambient pressure environment.
$
5,127.00
5127.0
USD
Price Valid only in North America
Sciencetech Vacuum Grade C230X Polarizing Chopper
The Sciencetech Polarizing variable frequency optical chopper is used with the detectors during Martin-Puplett mode. The chopper is positioned in front of the output port, and captures the output at 45 degrees from the two planes of polarization. This facilitates the retrieval of the Fourier Transform Interferogram during M-P mode. The chopper itself is designed for high stability and a broad range of frequency control (from 0.5Hz to 100Hz). The price includes the servo motor and software controller.
$
4,908.00
The Sciencetech Polarizing variable frequency optical chopper is used with the detectors during Martin-Puplett mode. The chopper is positioned in front of the output port, and captures the output at 45 degrees from the two planes of polarization. This facilitates the retrieval of the Fourier Transform Interferogram during M-P mode. The chopper itself is designed for high stability and a broad range of frequency control (from 0.5Hz to 100Hz). The price includes the servo motor and software controller.
$
4,908.00
4908.0
USD
Price Valid only in North America
Prev
1
2
3
4
5
6
7
Next
Prev
1
2
3
4
5
6
7
Next
Copyright
©
Sciencetech