More Views

(SOL-METER - D) Solar Reference Detector with Power Meter

Sku: 125-9012

Quick Overview

This product consists of the Sciencetech SOL-METER and our SSIVT-REF sun calibrated reference detector. The SOL-METER is a digital meter for use with solar calibrated detectors such as detector models SSIVT-REF or SC-LT. The meter converts detector measurements to a Sun value. It has a handheld meter that is compact, has a sturdy design, and is appropriate for indoor or outdoor applications.
The Sciencetech Reference Detector, which is an integral part of solar simulator calibration and solar cell I-V characterization, consists of a calibrated solar detector made of silicon.
The Reference Detector comes with calibration data taken by Sciencetech, calibrating it to a NIST-certified solar cell, on an accompanying certificate. It reads solar simulator irradiance in "sun" units; one sun is equal to 1,000 W/m^2, at 25 degrees Celsius and Air Mass 1.5 Global.
This tool's primary use is the testing of photovoltaic cells under standard conditions.

Availability: In stock

USD$1,675.00
OR

Additional Information

Name (SOL-METER - D) Solar Reference Detector with Power Meter
SKU 125-9012
Spectral Region NIR, UV, Visible
Detector Material UV Enhanced Silicon (UV-Si)
NEP < 8.1E-15 W/Hz½
Active Area (diameter or square) 2.5mm
Temperature Control Non-cooled
Spectral Range (nm) 180-1100 nm
AC or DC Coupling DC Coupled
Single or Multichannel Single
Responsivity @200nm 0.12 A/W Typical (0.10 minimum), Peak @960nm 0.5A/W
Detectivity (cm-Hz^1/2/W) N/A
Horizontal Pixel Range No
Detector Type Solid State

Customization:

SCIENCETECH has built a reputation on custom solutions.  Whether you need a small modification to an existing system or a completely novel design built from the ground up to meet your technical specifications, Sciencetech's engineering and optical design teams are ready to help.

 

Contact us for more details: