This single element detector is effective in sensing wavelengths between 1000 nm and 3500 nm. This unit is a high performance photodiode/receiver operated with at ambient temperature with a dual gain FET input transimpedence amplifier. Please note that it is available in various sensor area sizes and has an available thermo-electric cooler for lower dark current and improved signal to noise. The output is an analog signal available through a BNC connector at the back of the detector housing. Since the signal is analog, an optional 12-bit and 16-bit data acquisition system and software is available to digitize its output into a computer. A DC power supply for this detector (sold separately) is also required. This detector is designed for use with scanning monochromators to capture the intensity of one wavelength at a time. An optional mount allows it to mate to any Sciencetech scanning monochromators. Sciencetech can also provide an optional custom mount for mating to non-Sciencetech monochromators and spectrographs. The output voltage is proportional to the input signal current: V_out = I_signal . R_f . The PD/AMP is a DC coupled dual gain system. Care should be taken in shielding the unit from stray light during operation to prevent saturation of the amplifier (and potential failure).

Technical Specifications

• Operating temperature: 22°C
• Shunt resistance: ≥10Ω
• Shunt capacitance: 1200pF
• Responsivity: 0.8A/W