Intensified CCD (iCCD) Array Detector

Intensified CCD (iCCD) Array Detector
SKU: iCCD

This detector has a built-in image intensifier in front of the CCD sensor to multiply the light signal into the detector. It is used in very low light applications where the raw light signal is too low to be detected by a regular CCD sensor.

Sciencetech ICCD Detector is a 1.5ns nano-fast camera system. Complete Gated ICCD Camera System includes mount, spectrograph and software. ICCD mount and different models of spectrographs are available for additional price.

Gated Operation
For high speed electronic gating, the intensifier is normally turned off by holding the photocathode electrode a few volts positive (typically +50V) with respect to the MCP. This prevents any photoelectrons generated in the photocathode from reaching the MCP. Thus the intensifier acts as an electronic shutter preventing light from reaching the CCD, causing the CCD sensor to be dark during this period.
To gate the intensifier on, the voltage on the photocathode is made negative - typically –160 to –200V. This causes the generated photoelectrons to accelerate towards the MCP, get amplified in intensity and be detected by the CCD sensor.

  • 1.5 ns minimum gate width
  • 100ps-8s time resolution
  • 80s maximum gate width
  • 3.3 MHz gate repetition rate
  • Multiple direct images with 0.3 µs shutter
  • "Dead" time between exposures
  • 14 bit dynamic range
  • 752x582 pixel resolution
  • 6 x 4.5mm image area
  • Perfect distortion free image due to advanced proximity focused 18mm diameter MCP image intensifier and use of highest quality CCD array for best sensitivity and resolution
  • 4 x 104 Gain (VMCP= 0-1000V) single stage MCP
  • Customized 6 element f/0.8 distortion free lens coupling between image intensifier and CCD
  • 14.4 x 10.8mm image area single photon sensitivity
    big in features - small in size - "all in one head"
  • a standard RS 170 (60 Hz), CCIR (50 Hz), VGA or optional digital output
  • accepts C-mount lenses
  • Full field NikonF-mount
  • Olympus bayonet lens mount
  • Special spectrograph adapters are available
  • Weight 3.3kg,6.6 lb
  • Size 248(l) x 110 (w) x 135 (h) mm
  • CE certified
Price: $77,117.00
Inherent Spectral Response Bandwidth: 
180-820 nm