This single element detector is effective in sensing wavelengths between 1000 nm and 2800 nm. This unit is a high performance photoconductor receiver operated with at ambient temperature with a dual gain FET input transimpedence amplifier. Please note that it is available in various sensor area sizes and has an available thermo-electric cooler for lower dark current and improved signal to noise. The output is an analog signal available through a BNC connector at the back of the detector housing. Since the signal is analog, an optional 12-bit and 16-bit data acquisition system and software is available to digitize its output into a computer. A DC power supply for this detector (sold separately) is also required. This detector is designed for use with scanning monochromators to capture the intensity of one wavelength at a time. An optional mount allows it to mate to any Sciencetech scanning monochromators. Sciencetech can also provide an optional custom mount for mating to non-Sciencetech monochromators and spectrographs. The PD/AMP is a AC coupled dual gain system. Care should be taken in shielding the unit from stray light during operation to prevent saturation of the amplifier (and potential failure).
Technical Specifications

• Operating Temperature: 22°C
• Responsivity- @ pk: 2 x 10⁷ / 10⁶V/W
• Noise- : 2 x 10⁷ / 10⁶V/Hz^½
• Power Requirements: ± 9 VDC to ± 15 VDC
• Connections: BNC signal output. Shielded power cable terminated with a DB-9
  connector directly couples the unit with the PS -1 Low Noise Power Supply